Coilovers Suspension Kit for VW Golf Mk4 (1J) 2WD Inc GTi Shock Spring
Recommended Price
Product information
Description
maXpeedingrods B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.
Notice:No Top Mount Included
Application:
for VW Golf MK4 1J FWD 08/1997-12/2007
for VW New Beetle 9C1, 1C1 FWD 01/1998-11/2010
for Seat Leon 1M1 FWD 11/1999-06/2006
( Will not fit 4-MOTION (AWD) , VW Golf MK4 R32, and Audi quattro models. )
Specification:
Adjustable height: Front & Rear (depends on vehicle models)
Front lowering 30-90mm
Rear lowering 30-75mm
Damping : fix damping
Camber adjustable: Not available
Spring rate Front: 8 kg/mm (448 lbs/in)
Spring rate Rear: 6 kg/mm (336 lbs/in)
Spring length Front: 170 mm
Spring length Rear: 275 mm
Front spring inner diameter: 62 mm
Rear spring inner diameter: 58-63 mm
Helper spring rate Front: 1 kg/mm (56 lbs/in)
Helper spring length Front: 102 mm
Spring Preload advised: 7-10 mm
Damping rod diameter Front: Φ 20 mm
Damping rod diameter Rear: Φ12.5 mm
Damping thread Front: M52×1.5 mm
Twin -tube Diameter Front: 52 mm
Twin -tube Diameter Rear: 40 mm
Rod End Thread Front: M14×1.5 mm
Rod End Thread Rear: M10×1 mm
Front Coilover Length (Factory Setting): 540 mm / 21.26"
Rear Coilover Length (Factory Setting): 647 mm / 25.47"
Front Collapsed Length: 370 mm / 14.57"
Front Extended Length: 540 mm / 21.26"
Rear Collapsed Length: 410 mm / 16.14"
Rear Extended Length: 650 mm / 25.59"
Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners
Package size : 70*50*20 cm
Weight: 21050 g
Feature:
1. Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.
Features
- BrandMAXPEEDINGRODS
- Shock absorber onlyNo
- MaterialSteel / Aluminium
- AdjustableYes
- Type of vehicleCar
- ManoMano ReferenceME291292845
- MMID774959050322
- Product codeUR6QCO
- EAN6941538383958