Coilovers Suspension Kit for VW Polo Mk6 VI AW 1.0 TSI, 1.5 TSI, 1.6 TDI, GTI
Recommended Price
Product information
Description
maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.
Application:
For VW
For VW Polo Mk6 AW (2017-2025) for 1.0 TSI, GTI, 1.5 TSI, 1.6 TDI, GTI
For Audi
For Audi A1 Mk2 GB Sportback (2018-2025) 25 TFSI (1.0), 30 TFSI (1.0), 35 TFSI (1.5), 40 TFSI (2.0)
For SEAT
For SEAT Ibiza Mk5 KJ (2017-2025) for 1.0 MPI, 1.0 TSI, 1.5 TSI, 1.6 TDI
For Skoda
For Skoda Fabia Mk4 PJ (2021-2025) 1.0 TSI, 1.5 TSI
For Skoda Scala (NW) (2019-2025) 1.0 TSI, 1.5 TSI
Specification
Front lowering : 30-65mm depending on the vehicle models
Rear Lowering: 30-60mm depending on the vehicle models
Damping : fixed damping
Top mounts: Front and rear OE top mounts required
Spring Rate Front: 3.5 kg/mm(196 lbs/in)
Spring Rate Rear: 2 kg/mm (112 lbs/in)
Front spring inner diameter: 64-117-83 mm
Rear spring inner diameter: 58-63 mm
Spring length Front: 239 mm
Spring length Rear: 230 mm
Helper spring rate Front: 1 kg/mm (56 lbs/in)
Helper spring length Front: 102 mm
Spring Preload advised: 7-10 mm
Shock Type: Twin tube
Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners
Feature
1. Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-20 months will keep it smooth and clean, which helps to extend the lifetime.
Features
- BrandMAXPEEDINGRODS
- Shock absorber onlyNo
- AdjustableYes
- Type of vehicleCar
- ManoMano ReferenceME291290523
- MMID768460066997
- Product code2DH1PC
- EAN6941577324189