DC 12V 24V (9-30V) to 36V 15A 540W Step-Up Voltage Converter, Voltage Regulator, Power Transformer Module, IP67 Waterproof

Features:1. SIMPLE AND DURABLE: The boost transformer is easy to install, has high performance and a high conversion rate, offering great convenience for your life.
2. EXCELLENT PERFORMANCE: The boost transformer adopts excellent components, synchronous voltage regulation technology, very low heat generation, sufficient power, and stable operation.
3. LOW HEAT GENERATION: The DC to DC boost converter adopts several ultra-low impedance ripple electrolytic capacitors and multi-wire inductors with magnetic rings made of iron, silica, and aluminum, resulting in low heat generation and high throughput current.
4. WATERPROOF HOUSING: The boost transformer uses a fully sealed housing as a heat sink, is IP67 waterproof, shockproof, and dustproof, making it more durable.
5. MULTIPLE PROTECTION FUNCTIONS: Built-in Boost Converter with protection against overvoltage, undervoltage, overload, overheating and short circuits, very reliable
6. Wide application: The voltage booster is widely used in vehicles, security systems, hospital equipment, telecommunications, electrical equipment, LED light strips, motors, security equipment, etc.
Specifications:Item Type: Voltage Boost Converter
Input Voltage: 12V 24V (9-30V)
Output Current: 15A
Output Voltage: 36V
Output Power: 540W
Operating Temperature: -20℃~80℃
Waterproof Rating: IP67
Size (L x W x H): approx. 100 x 80 x 40 mm / 3.94 x 3.15 x 1.57 inches

Package List:1 x Lift Converter
Note:1. In order to ensure the normal operation of the converter, the input voltage should not be lower than the minimum or maximum input value limited by the product, the input voltage value should be higher than the output voltage value of 2V, if there is no 2V. Pressure difference, the output value will be lower, but will not damage (affect) the use of the converter.2. The input current should be greater than or equal to the power required by the output charging device (for example: the power of the charging device needs 100W, then the input power should be greater than or equal to 100W).When using the converter, the current from the load device must not exceed the maximum current the converter can handle. Allow as much margin as possible to ensure the converter operates normally and reaches its maximum capacity.Conversion efficiency. 3.The positive and negative terminals of the converter must not be reversed during use, as this could damage the converter.It is recommended to add a suitable safety tube to the input terminal during use.The chip operates in light load mode when there is no load, and the output voltage may vary within a certain range.