DC 12V DC Motor Controller, RF 433Mhz Wireless Remote Control Switch Relay Receiver with 4 Transmitters, for Forward and Reverse Rotation of Motors, Gate Door, Rolling Shutter

Features: * Very convenient to use, simple wiring diagram. *It can connect to electronic control lock, light, fan, window, curtain, motor, car, lifting device, motor control, lift control or other devices with AC85V-250V or DC12V. So it can remotely unlock the door, close the light, open or close the curtain, etc. * You can turn on/off the receiver with the transmitter (remote control) from any location within a reliable distance (50m open area). (Wireless RF signal can pass through walls, floors and doors.) * One/multiple transmitters can control one/multiple receivers simultaneously. * Supports remote controls of up to 16 pieces. * This switch can learn 1527 coded remote controls.*The working mode can be changed by yourself: you can switch to momentary, toggle, latching mode according to your needs. *The wireless receiving controller, with high privacy, stable performance, low power consumption, skip line or code switching coding. *Pair code learning: It can work with any remote control with the same frequency, so you no longer have to worry about losing the remote control. (If the remote controller is lost, please buy one and pair it with the receiver, it's OK.) Specifications: Input Power: DC12V Channel: 2CH Standby Current: ≤10mA Max.Operating current: 10A RF frequency: 433MHz Receiving sensitivity: ≤-105dBm Transmission distance: 50m (open area) Remote control storage: up to 16pcs Working mode: momentary, toggle, latch Momentary: (press and hold -> on, release -> off) Latched: (press -> on, press another button -> off) Toggle: (press -> off) on, press again -> off) Wiring type: fixed terminal Output terminal: NO, NC, COM Output power supply: DC/AC optional Remote control battery: 2 * CR2016 3V (included) Supported remote control type: learning code (1527 chip) Operating temperature: -10℃ + 60℃ Receiver board size: approx.7.1 x 5.1 x 2.2cm/2.79 x 2 x 0.86in Fuse Box Size: Approx. 8.6 x 6.1 x 2.8cm/3.39 x 2.4 x 1.1in Package Information: Package Size: Approx. 15 x 11.5 x 5cm/5.9 x 4.53 x 1.97in Package Weight: Approx. 147g/5.19oz Package List: 1 Receiver Board 1 Fuse Box 4 Remote Controls