DC 24V 7m 1000 L/H Water Pump with Solar Lift, Hot Water Circulation, and Brushless Motor

Features: - This DC pump uses advanced electronic components and a high-quality, wear-resistant shaft. - It operates smoothly, has high efficiency, good performance, and a long service life. - It can operate continuously for extended periods, with low noise, safety, and environmental protection. - It is widely used in industry, scientific research, and the aerospace industry. Specification: Name: Solar water pump Model: JI-680-24 Material: Acrylonitrile butadiene styrene plastic Color: Black Sizes: 73.9 x 51.43 x 40.6 mm Voltage: 24V Current: 1.2A Power: 28.8W Max water head: 7M Max flow rate: 1000 L/H Starting voltage: 6V Waterproof rating: IP68 Usage: Connect the water pump cable (the red wire is positive, do not reverse it) to a suitable power source (a battery can be used, or a power converter can be used), then connect it to a suitable water supply, and pump water. It can then be used normally. (Note: The DC brushless pump is a centrifugal pump; the pump's water flow rate decreases as the head increases. Do not submerge without the self-priming function; do not allow for operation without water.) Common Troubleshooting: 1. The pump's flow rate is reduced or there is no water.(The pump chamber can be disassembled for cleaning.)2. Use here when the pump is not flowing water.(There is air in the pump or in the pipe.) Package includes: 1 x solar water pump. Note: Do not connect the pump with the correct positive and negative terminals.2.Do not connect the pump directly to a 220V power supply via a power converter.3.It is strictly forbidden to expose the pump to strong acidity, alkali, or other substances that could damage it.4. The pump is suitable for an average temperature of 1°C - 60°C.