DC Boost Converter, Module Board Power Supply Step-Up Printed Circuit Board, Voltage Boost Converter for Capacitive Load Power

Features:1.Voltage stabilization function. Boost module without isolation
2.Output voltage will not change based on input voltage
3.Supports short-circuit protection
4.Supports overcurrent/overvoltage protection
5.Supports reverse input protection
Specifications:Description:
This boost module has a voltage stabilization function. It is used for capacitive charging, hunting and rodent control, or as a power supply for an electromagnetic gun, electronic equipment, or for testing voltage supply or fluorescent tubes.
Features:
1. Voltage stabilization function. Boost module without isolation..
2. The output voltage will not change relative to the input voltage.
3. Supports short-circuit protection.
4, Support overcurrent/voltage protection.
5, supports reverse input protection.
Specifications:
Input voltage: (2 options, select via the connecting wire on the back of the PCB)
a, 8-16V
b, 10 -32V (default)
Input current: 5A (maximum)
Quiescent current: 15mA (will be higher when 12V to 50V)
Output voltage: ±45-390V (default ±50V)
Output Current: Maximum 0.2A (associated with input and output voltage): 75KHz
Conversion efficiency: 88% (max)
Protection against Short circuits: Support (please do not draw the short circuit arc directly to the output. Direct short circuit arcing may damage rectifier devices.Please connect power resistors in series to limit the current. Support (fuse).
Installation method: Four 3mm screw terminals, solderless.
Suitable for:
1. Charging capacitors or powering an electromagnetic gun.
2. Powering electronic equipment.
3. Testing voltage or fluorescent tube power supplies.
4. Hunting and rodent control.
Package includes:
1 x Boost module
Note:
1. Be careful!This module has a high output voltage, which is dangerous to humans and animals.
2. Please note that the new and old types of this product will be sent randomly, and make sure this is acceptable to you before ordering.