DC-DC Step-Down Converter, 36V/48V to 12V Power Voltage Transformer, 30A, 360W, Enlarged Aluminum Casing

1. When the protected circuit enters a dangerous value, the built-in protector automatically cuts off the circuit and resumes normal operation when the value returns to the normal range. It features automatic protection functions such as overcurrent, overvoltage, overheating, short circuit, etc.
2. Designed with potting and sealing technology, providing comprehensive, more stable, and reliable protection.
3. Utilizing a waterproof design, the organic silica gel coating offers waterproof, dustproof, and shockproof properties, making it suitable for use in various harsh environments.
4. Can be used for LED car displays, surveillance cameras, electric fans, water pumps, motors, digital photovoltaic power control equipment, water pumps, routers, ADSL modems, and switches.
5. Suitable for LED lamps, digital photo frames, electronic refrigerators, portable DVD players, stereo systems, security systems, portable tools, printers, network equipment, various industrial electrical equipment with corresponding voltages, etc.

Specification:

Item Type: Dollar Converter
Material: Organic Silica Gel + Aluminum
Model: GYVRM-JD1L481230
Input Voltage Range: 36V/48V (DC30-60V)
Output Voltage: 12V
Rated Output Current: 30A
Output Power: 360W
Protection Level: IP67
Conversion Efficiency: Up to 96%
Operating Temperature: -20?~+80?
Installation cable length: approx. 13 cm / 5.1 inches

Package List:

1 x Buck Converter

1 x Wiring Diagram

Note:

1. To ensure normal operation of the converter within the input voltage range, the input voltage should not be lower than the minimum or maximum input value limited by the product during use, and the input voltage value should be more than 2V higher than the output voltage value. If there is no 2V difference, the output value will be lower, but this will not damage (affect) the use of the converter. 2. The input current must be greater than or equal to the power required by the output load device (for example, if the load device requires 100W, the input power must be greater than or equal to 100W). When the converter is in use, the load device current must not exceed the maximum current the converter can handle, and the converter should have as much headroom as possible to ensure normal operation and maximum conversion efficiency. 3. The positive and negative terminals of the converter must not be reversed during operation. A reversed connection can damage the converter. It is recommended to add a suitable fuse to the input terminal during operation. 4. When there is no load, the chip operates in light load mode, and the output voltage may vary within a certain range.