DC motor drive board, Bob Drv8871 drive module, 3.6A Pwm control port.

DC MOTOR DRIVER: The DRV8871 is a brushed DC motor driver for printers, equipment, industrial equipment, and other small machines. H-BRIDGE DRIVER: Two logic inputs control the H-bridge driver. The driver consists of four N-channel MOSFETs, which can control the motor in both directions with a peak current of up to 3.6 A. CURRENT DEBRIDGE MODE: By selecting the current decay mode, the input can be pulse-width modulated (PWM) to control the motor speed. ADVANCED CURRENT REGULATION CIRCUIT: The DRV8871 features an advanced current regulation circuit that does not use an analog reference voltage or external sensing resistor. REGULATION CIRCUIT ADVANCED CURRENT: The DRV8871 device features an advanced current regulation circuit that does not use an analog reference voltage or external sensing resistor. DC Motor Driver DC Motor Driver Drive Module Electronics DRV8871 Motor Drive Board DC Motor Driver BOB Driver Specification: Condition: 100% Brand New Item Type: DC Motor Driver Material: Metal Color: Black H-Bridge Motor Driver - Drives a DC motor, a stepper motor winding, or other loads Wide operating voltage of 6.5V-45V RDS type 565m (on) (HS+LS) Maximum current drive of 3.6A PWM control interface Current regulation without sensing resistor Low power standby mode Small package and footprint: - HSOP 8-pin with PowerPAD - 4.96 mm / 0.19 x 0.24 inches. Built-in protection functions: - VM undervoltage lockout (UVLO) - Overcurrent protection (OCP) - Thermal shutdown (TSD) - Automatic fault recovery applications: Printers, Appliances, Industrial equipment, Other mechatronic applications. Package list: 1 x DC motor driver