DC6V 2W GBMQ-GM12BY20 Gear Motor With Magnetic Coded Disc Hall Encoder (6V 30RPM)
You may also like
Compare with similar items
Product information
Description
1、This product is a DC gear motor with magnetic coded disc hall encoder
2、This DC motor features large moment of force, low speed, and low noise.
3、The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life.
4、This motor is adopted of pure copper wire coil, with low heat and low loss.
5、Widely used in Electronic locks, DIY toy cars, little robots, tracking cars, balancing cars and so on
Features:
This product is a DC gear motor with magnetic coded disc hall encoder
This DC motor features large moment of force, low speed, and low noise.
The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life.
This motor is adopted of pure copper wire coil, with low heat and low loss.
Widely
used in Electronic locks, DIY toy cars, little robots, tracking cars, balancing cars and so on
Specification:
Model:GBMQ-GM12BY20
Material: metal
Voltage: DC 6V
Power: 2W
Output signal: AB phase
Shaft length: 10mm/0.4in
Shaft diameter: 3mm/0.1in
Hall response frequency: 100KHz
Operating temperature range: -30 ℃ ~ 110 ℃
Output pulse number: 3ppr
Type(Optional): 6V 30RPM,6V 50RPM,6V 60RPM,6V 70RPM
Length: 4.2cm/1.7in
Weight: 14g/0.5oz
Wiring method:
black: motor power"-"
red: motor power"+"
brown: encode power "+"
green: encode power "-"
blue: encode output A phase
white: encode output B phase
(Note: Encoder input voltage: 3.3-12v)
Package list:
1 x gear motor
Features
- BrandSTUNACY
- MaterialMetal
- ColourBlack
- ControlRemote-control
- Motorization useFor swing gate
'/%3E%3C/svg%3E){kind=small}