DCDC Power Converter, 12V to 48V, 1.5A, 72W, IP67, Automatic Overheat Protection

Features:1.Comes with automatic protection functions such as overcurrent, overvoltage, overheating, short circuits, etc., for worry-free use.
2.The built-in protector automatically cuts off the circuit when the value of the protected circuit is dangerous and resumes normal operation when the value returns to the normal range.
3.Designed to be encased in organic silica gel, waterproof, dustproof, and vibration-resistant, for comfortable use and added convenience.
4.Comprehensive protection, perfectly suited for use in various harsh environments, and more stable and reliable in operation.
5.Suitable for surveillance cameras, electronic refrigerators, portable DVD players, audio equipment, security systems, portable tools, printers, etc.
Specifications:Item Type: Power Regulator
Material: Organic Silica Gel + Aluminum
Input Voltage Range: DC9-30V
Output Voltage: 48V
Rated Output Current: 1.5A
Output Power: 72W
Protection Rating: IP67
Conversion Efficiency: Up to 96%
Operating Temperature: -20℃ to +80℃
Installation Cable Length: Approx.13 cm/5.1 inches
Application: For car LED displays, surveillance cameras, electric fans, water pumps, motors, photovoltaic power digital control equipment, water pumps, routers, ADSL modems, switches, LED lights, digital photo frames, electronic refrigerators, portable DVD players, audio equipment, security systems, portable tools, printers, network equipment, and various industrial electrical equipment with compatible voltages, etc.

How to Use:Wiring Instructions: Output: Yellow wire to positive Black wire to negative Input: Red wire to positive Black wire to negative

Package List:

1 x Power Regulator

Note:

1. In order to ensure the normal operation of the converter within the input voltage range, the input voltage should not be lower than the minimum or maximum input value restricted by the product during use. The input voltage value should be greater than the output voltage value by more than 2V. If there is no voltage difference of 2V, the output value will be lower, but it will not damage (affect) the use of the converter.2. The input current should be greater than or equal to the required power of the output charging device (for example, if the power of the charging device should be 100 W, then the input power should be greater than or equal to 100 W).When the converter is in use, the current from the load device must not exceed the maximum current the converter can handle, and leave as much margin as possible to ensure the converter operates normally and achieves the highest possible conversion efficiency.3.The positive and negative terminals of the converter must not be connected in reverse during use.Reverse connection can damage the converter.It is recommended to add a suitable fuse to the input terminal during use.When there is no load, the chip operates in light load mode, and the output voltage may vary within a certain range.