Desoldering pump and desoldering braid – 7-piece electronics set with hand pump and copper desoldering braid
Product information
Description
- High-Efficiency Desoldering Pump – The desoldering pump features a double opening ring and a release button. Simply create suction and, with one hand, activate the trigger to effectively remove solder from the circuit board.
- Copper and Rosin Desoldering Braid – 6 pieces of desoldering braid in 3 sizes: 2.0 mm / 2.5 mm / 3.0 mm wide, 1.5 m long, 2 pieces of each size. The geometrically precise structure allows for the removal of excess solder from the pins to prevent short circuits and meet your various soldering needs.
- High-Quality Desoldering Pump – The desoldering pump consists of an ABS housing, a non-slip sponge, and a nylon nozzle. High-quality ABS makes the soldering suction cup robust and durable. The sponge absorbs static electricity, sweat, and heat. The nylon nozzle is heat-resistant and therefore suitable for long-term use. 7-in-1 Solder Removal Tool – 1 soldering suction cup and 6 desoldering braids in 3 sizes, a versatile electronics set. The desoldering braid absorbs the solder, and the desoldering pump removes it quickly. Wide range of applications – The desoldering braid and desoldering pump are suitable for repairing faults on small circuit boards, removing relays and other components from circuit boards, resoldering mechanical switches for keyboards, desoldering old wires from devices, desoldering computer components such as motherboards, cleaning SMD components, etc. Product description: Set of 7 desoldering pumps and desoldering braid. Specifications: Desoldering pump; Material: ABS; Length: 206 mm; Diameter: 20 mm; Application: 1. Press the plunger until it clicks into place with the suction cup. 2. Heat the solder until it is liquid. is.
3: Place the desoldering suction cup. Hold the desoldering pump near the liquid and then press the button.
4: Repeat this process if necessary.Note
* Do not disassemble the nylon suction nozzle when using the desoldering pump for the first time to prevent leakage.
* Remember to replace the black rubber band on the cup and screw the nylon suction nozzle back on after removing the protective film to ensure the cup functions properly.
* If you do not feel spring pressure on the double spring mechanism when pressing the plunger, check that the nylon suction nozzle is screwed on tightly.Desoldering Braid
Material: Copper with Rosin
Width: 2.0 mm / 2.5 mm / 3.0 mm
Length: 1.5 m
Diameter: 55 mm
Application
1: Place the braid on the solder joint you want to remove. would like.
2: Heat the soldering iron and solder the braid.
3: Remove the braid once the solder has been absorbed.
4: Cut off the used braid; repeat this process if necessary.
Scope of delivery:
1 * Deodorizing pump
2 * Solder braids 1.5 m x 2.0 mm
2 * Solder braids 1.5 m x 2.5 mm
2 * Solder braids 1.5 m x 3.0 mm
Features
- BrandOTHERS
- Weight135 g
- AntistaticYes
- Replaceable bitsYes
- MaterialCopper
Soldering iron buying guide
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}