Great piece of equipment at a good price. Used with a diamond disc to cut floor tiles - great result.
Dewalt DCG405N 18v XR Brushless Cordless 125mm Angle Grinder - Bare + Tstak Case
You may also like
Compare with similar items
Often purchased together
Product information
Description
GENERAL DESCRIPTION
The Dewalt DCG405 Brushless Angle Grinder features a no-load speed of 9000 RPM and a 125mm disc diameter. It is sold as a bare tool without a battery or charger. The 18V brushless motor enhances efficiency and application performance.
TECHNICAL SPECIFICATIONS
- No Load Speed: 9000 RPM
- Disc Diameter: 125mm
- Motor: 18V Brushless
- Capable of 69 cuts in 1/2'' steel rebar with a 5.0Ah battery
- Braking Time: < 2 seconds
COMPATIBILITY AND ACCESSORIES
- 2 Position Side Handle
- Keyless Protective Guard
- Blade Wrench
- Tstak Case with Inlay
OTHER INFORMATION
The grinder features a compact gear case for better access to tight spaces and excellent cutting depth. It has a slide switch to reduce user fatigue and a built-in no-volt release for protection against accidental startups. The electronic brake helps minimize accidental contact and injury, while the Constant Clutch and E-Clutch protect against kickbacks, cuts, and wheel bursts. Mesh covers restrict dust from entering the motor, and the ergonomic slim body with rubber over-mould improves comfort and control.
Features
- BrandDEWALT
- Length31 cm
- Weight1.75 kg
- Power800 W
- Voltage18 V
Customer reviews
Dewalt is my tool of choice, reliable, comfortable and easy to use. Dewalt isn’t cheap but for me you can’t beat the quality.
Good product!
I bought the bare grinder in a T-Stak case as I already have 2x 5Ah and 2x 2Ah batteries and 2x chargers. My old Bosch corded grinder of 20+ yrs had died and I was in the middle of a Velux installation with the required roof tiling. Having a cordless grinder was attractive, so I bought the DeWalt. It didn't disappoint! Even fitted with the lighter 2Ah battery, it lasted all day for cutting cement fibre tiles, which are admittedly only 3-4mm thick. I didn't have to cut the thicker ridge tiles. Needing 125mm discs is a little bonus. It's lighter than my old Bosch and not having the cord is fantastic & a lot safer when you're on the roof! A great tool.
1 person found this helpful
















