Diamond Glass Hole Saw Drill Bit with Center Pilot Bit for Glass, Ceramic Tile 35mm
You may also like
140224 82 mm X 400 mm Dry and Wet Diamond Core Drill Bit vidaXL
140228 132mm X 400 mm Dry and Wet Diamond Core Drill Bit vidaXL
VEVOR 6 Pcs Diamond Hole Saw Set Drill Core Bits M14 Thread 20/25/40/45/50/68 MM(0.79/1/1.6/1.77/2/2.7 Inch) With 2 Saw Blades
Compare with similar items
Product information
Description
- Suitable for processing stone, tiles, ceramics, glass and granite, etc. The pilot bit in the center helps cut precise holes
- Long Life: Reduced drilling speeds, low drilling pressure, and increased use of water lubrication will extend the life of the drill bit
- Clearance Hole: Diamond drill bits along with the clearance hole facilitate the entry of cooling water and the evacuation of chips from the drill bit. Facilitates the drilling process
- Sharp & Smooth Cutting: The diamond hole saw creates high-precision smooth cuts without broken edges. White zinc plating on the bits maximizes tool life with high corrosion resistance
- Please note: Water is required for lubrication and cooling when drilling. Do not use on concrete or for depths beyond approximately 1/2 inch.
Product Description
Description:
1. Smooth and precise finish to reduce cutting resistance and drilling pressure, increasing sharpness and water lubrication efficiency.
2. Produce clean, accurate holes in minutes with little or no chipping. The pilot bit in the center helps cut precise holes.
3. White zinc plating on the bits maximizes tool life with high corrosion resistance. Excellent for drilling glass or ceramics and greatly extending the life of the bit.
4. Diamond drill bits along with the clearance hole facilitate the entry of cooling water and the escape of chips and other particles from drilling. Makes the drilling process easier.
5. Suitable for processing stone, tiles, ceramics, glass and granite, etc. Works best with an electric drill (excluding the item).
Specifications:
Material: Diamond, Carbon Steel
Features: with Center Pilot Bit
Finish: White Zinc Plating
Package: 1pcs x Diamond Drill Bit
Usage Note:
1. Please always use lubrication (water) when the drill bits are working.
2. Low drilling pressure and increased use of water lubrication will extend the life of the drill bit.
3. Do not use on concrete or for depths beyond approximately 1/2 inch.
Features
- BrandIKODM
- Pcs per pack1
- Diameter35 mm
- Suitable forTiling
- MaterialDiamond
- Type of accessory for core drillCrown bell
- ManoMano ReferenceME225238437
- MMID803690093913
- Product codeKWI1568
'/%3E%3C/svg%3E)
Core drill buying guide
Advice from our experts
'/%3E%3C/svg%3E){kind=small}