Skip to main content
1/4

Diesel Jump Start Cable, 1 Pair of 12V Power Cables for Car Emergency Booster Battery Jump Start Cables Battery Line Jump Starter Cables (4M/2000A).

£94.59
Of which environmental contribution £0.01 including VAT.
Sold by Sinocor GmbH

Product information

Description

1. The battery jumper cable is an excellent accessory to have in cars for emergencies.
2. Complete set (one positive cable with 2 clamps and one negative cable with 2 clamps).
3. Color-coded and insulated clamps, effectively minimizing the risk of accidental short circuits.
4. With a double construction and extra-strong pure copper teeth for a solid connection.
5. Flexible 3m (9.8ft) or 4m (13.1ft) cable for easy and convenient connection to two cars.


Specification:

Features:
The battery jumper cable is a great accessory to have in cars for emergencies.
Complete set (one positive cable with 2 clamps and one negative cable with 2 clamps).
Color-coded and insulated clamps effectively minimize the risk of accidental short circuits.
With double construction and extra-strong pure copper teeth for a solid connection.
Flexible 3m (9.8ft) or 4m (13.1ft) cable for easy and convenient connection to two cars.
Specification:
Condition: 100% Brand New
Material: Rubber + Brass Wire.
Color: Black + Red
Voltage: 12V
Length/Current: 4m/2000A, 3m/1000A (optional)
Package Weight: Approx. 1269-1608g/44.8-56.7oz
Operating Procedures:
1. Connect one red (+) clamp end of the cable to the positive terminal of the discharged battery.
2. Connect the other red (+) clamp end of the cable to the positive terminal of the good battery.
3. Connect one black (-) clamp end of the cable to the negative terminal of the battery.
4. Connect the other black clamp end of the cable to the engine block or car body.
5. When starting, complete the operation immediately; allow 10 seconds of cooling time between starts.
6. The cable discharge procedure follows the reverse steps of the installation.
Package List:
1 * Pair of Battery Jump Leads
Notes:
1. Operate strictly in accordance with the operating procedures.
2. Check the voltage markings on both batteries to ensure they are identical.
3. Turn off all vehicle loads, engage gears, apply the parking brake, and start the engine. Smoking is prohibited near the vehicle.
4. If the vehicle battery is frozen, do not attempt to start the engine, as this may cause an explosion.
5. Please ensure the battery cable polarity is correct.
6. The vehicle must not come into contact with other vehicles while in operation.
7. The battery will produce explosive gases! Wear a protective visor when installing the cable.
8. If battery acid accidentally leaks and splashes onto your skin or into your eyes, rinse them immediately with plenty of water and seek medical attention.

Features

  • Brand
    TEHTUY
  • Voltage
    12 V
  • Pcs per pack
    1
  • Fuel
    Diesel
  • Length
    4 m
Advice from

Jump lead buying guide

Jump leads are an invaluable piece of kit in the event of a flat car battery. Select them according to your engine type, the quality of their clips, the amperage of your battery and the length of the cables. You will also have to choose a cable cross section; the most common options are 25 mm², 35 mm² or 50 mm².
Jump lead buying guide
You are here:
The DIY, home and garden specialist

The DIY, home and garden specialist

Reliable delivery

Reliable delivery

Flexible payment options

Flexible payment options

More than 7 million individual and professional customers

More than 7 million individual and professional customers