1/5
Digital Humidity Controller Hygrometer XH-W3005 Regulator Temperature Humidity Sensor 099% RH 12V / 24V / 220V (220V)
Sale
-3%
Of which environmental contribution £0.01 including VAT.
Sold by LinzGain Sarl
You may also like
Compare with similar items
Product information
Description
1. High-quality, durable digital humidity controller. 2. Simple panel: two up and down buttons, easy to adjust and use. 3. High measurement accuracy of 0.1%, easy-to-read data. 4. Wide humidity measurement range of 00%~99% RH and wide fields of application. 5. Multi-voltage selection: 12V/24V/220V are optional; you can choose the voltage according to your needs.
Specification:
Features: High-quality, durable digital humidity controller. Simple panel: two up and down buttons, easy to adjust and use. High measurement accuracy of 0.1%, easy-to-read data. Wide humidity measurement range from 00% to 99% RH and wide fields of application. Multi-voltage selection: 12V/24V/220V are optional; you can choose the voltage according to your needs. Specification: Model: XH-W3005 Weight: 68g/2.4oz Input Voltage: 12V, 24V, 220V (optional) Humidity Range: 00%~99% RH Humidity Control Accuracy: 0.1% RH Load Power: 120W/240W/1500W Output Type: Direct Output Mounting Hole Spacing: 73mm/2.9in Size: 60*45*31mm/2.4*1.8*1.2in Operating Instructions: Connect the thermostat to the circuit and power supply. The digital display shows the starting temperature and current humidity setting. Press the "up" button to display the start-up temperature. Press and hold the "up" button for approximately 3 seconds, and the start-up humidity reading will flash. This reading can be adjusted using the up and down buttons. To adjust the stop-down humidity: Press the "down" button to display the stop-down humidity. Press and hold the "down" button for approximately 3 seconds to stop the humidity reading from flashing. This reading can be adjusted using the up and down buttons. To restore factory settings: When the unit is powered on, press and hold the up and down buttons simultaneously. The display will show 888 and then automatically switch to the humidity detection value, thus restoring the factory settings. Package list: 1x digital humidity controller. Note: The W3005 is a direct output, so please do not turn it on if the output end is not properly connected or is not connected, in case the two-stage contact spark and careless wire contact cause unnecessary problems.Features
- BrandSNQ
- MaterialGlass fibre
- Hygrometer Function(s)Thermometer
- Display typeDigital thermometer
- ManoMano ReferenceME96209902
You are here:
'/%3E%3C/svg%3E){kind=small}