DN20 Adjustable brass water pressure reducer with pressure gauge, adjustable brass water pressure regulator (DN20)

HIGH QUALITY: The water pressure reducing valve is made of brass, durable and easy to install. Suitable for both cold and hot water. CONVENIENCE: The water pressure regulator can reduce water pressure and make it stable. Easy to adjust, simply turn the brass screw (on top of the regulator) to change the pressure - or +. GOOD FUNCTIONALITY: This pressure reducing valve adopts a piston structure, simple internal structure, strong environmental performance, and is durable. APPLICATION: Hydraulic instability, excessively rapid water flow, water purifiers, solar energy, gas heaters, and faucets. EASY TO USE: Compact size for easy use, removable valve drawer for easy cleaning or replacement when needed to remove it. Technical Specifications: Material: Brass. Maximum Load: 16 kg/cm². Maximum Dimensions: 0.05–0.8 MPa (7.25–116 psi). Connector Size: DN20 Inlet Pressure: 1.6 MPa (Max)/232 PSI. Weight: 425g. Package Contents: 1 pressure gauge. 1 brass water pressure reducing valve. Note: The direction of water flow from the valve body installation must be strictly consistent with the direction marked on the valve. If the direction is incorrect, the water pressure gauge will not function. After installation, adjust the valve to an appropriate pressure range to prevent excessive pressure from damaging the gauge or the gauge from malfunctioning if the pressure is too low. Just needing to install a water pressure reducing valve can help you solve the problem. The water pressure is too high, the electric water heater is making normal noise, the safety valve is ticking and the probe is leaking water The water pressure is too high and the water pressure is 0.3 MPA from the water purifier. Water pipes often explode and water overflows Jinshan   6 main advantages Filter Design/Clogging Prevention   The water inlet is equipped with a stainless steel filter/can filter particles in the water to protect the valve body from damage/extend its lifespan. Thickened/clear wire interface The main body is made of single pass/easy installation forging/thickening wire interface design and no water loss. Adjustable design/pressure It is possible to adjust different pressure values/a wide range of applications. Valve body indicator/installation direction. The pressure reducer can be installed horizontally or vertically. The flow direction must be the same as that indicated on the valve. Manual pressure adjustment method. Using the hexagonal pressure adjustment key, the pressure can be adjusted according to the effective water pressure. You can turn the protective cover on the upper part of the pressure-reducing valve counterclockwise to remove it by hand. Insert a hex key into the upper hole to adjust the water pressure: 0.05-0.8 MPa (7.25-116 psi) - Suction pressure: 1.6 MPa (maximum)/232 PSI. Turn counterclockwise to reduce the water pressure. Turn clockwise to increase the water pressure.  Pressure gauge installation method. The pressure reducing valve is equipped with a pressure gauge interface. By installing a pressure gauge, the real-time pressure can be displayed intuitively. The pressure gauge can be installed and connected to the outlet of the pressure reducing valve. First, use an adjustable wrench to remove the cap on the pressure gauge interface, then install. During installation, the interface is already equipped with a sealing gasket; it is not necessary to unscrew the raw material directly for installation.