DN20 Adjustable Brass Water Pressure Reducing Valve with Pressure Gauge, Adjustable Brass Water Pressure Reducer (DN20)

HIGH QUALITY: The water pressure reducing valve is made of brass, durable and easy to install. Suitable for both cold and hot water.

GOOD FUNCTIONALITY: This pressure reducing valve adopts a piston structure, simple internal structure, strong environmental performance, and is durable.

CONVENIENCE: The water pressure regulator can reduce water pressure and make it stable.

Easy to adjust, simply adjust the brass screw (at the top of the regulator) to change the pressure - or +

EASY TO USE: Compact size for easy use, removable valve spool for easy cleaning or replacement when needed.

APPLICATION: Hydraulic instability, excessively fast water flow, water purifiers, solar power, gas heaters, and faucets.

Technical Specifications:

Material: Brass.

Maximum Load: 16 kg/cm².

Maximum Residual Current: 0.05 – 0.8 MPa (7.25 – 116 psi).

Connector Size: DN20

Inlet Pressure: 1.6 MPa (Max) / 232 PSI.

Weight: 425 g.

Package Contents:

1 Pressure Gauge.

1 Brass Water Pressure Reducing Valve.

Note: The direction of water flow from the valve body installation must strictly match the direction marked on the valve. If the direction is incorrect, the water pressure gauge will not function. After installation, adjust the valve to a suitable pressure range to avoid excessive pressure damaging the gauge, or the gauge not functioning if the pressure is too low.