Dog Training Device Anti Barking Pet Products Remote Control Dog Training Collar

Main Features 1. The remote control transmitter is flexible, compact and easy to use. 2. The receiver can be used normally when the dog is drinking water or in rainy weather, but not for swimming or diving. 3. Vibration and static speeds are adjustable. Please choose the appropriate speed when using for the first time. Speeds from 1 to 100 gradually increase during the test. 4. 4 operating modes: static electricity, vibration, sound, flash. 5. The remote control range of this trainer is 300 meters (without interference). 6. It has two signal channels, and a single transmitter can control two receivers of the same model. 7. Energy efficient design, with auto sleep and memory functions. 8. This trainer is suitable for most medium and small dogs. Product weight: 264 g (including plastic packaging). Related description 1.Antenna: transmits signals to the receiver. 2. Flashlight: Turns on when button 6 is pressed. 3. Indicator light: This light flashes when the remote control transmitter is working: When charging, this light is red. 4. LED screen 4. Electrostatic mode: In this mode, press the Y button and the receiver will emit static electricity: Press the up/down button to adjust the gear position. The gear position is divided into 0-100. Vibration mode: In this mode, press the Y button and the receiver will vibrate: Press the up/down button to adjust the gear position. The gear position is divided into 0-100. D. Sound mode: In this mode, press the Y button and the receiver can beep, but the gear position cannot be adjusted. Flash Mode: In this mode, press the Y button and the LED indicator on the receiver will keep flashing red.Signal channel 1.2: Use the button in figure ⑦ to select signal channel 1 or 2 as the channel to connect the remote control transmitter and receiver. Note: If you purchase a receiver, you can choose any signal channel. If you buy two receivers, choose one channel for each, i.e. separate control. After selecting the signal channel, follow the instructions on the back and follow the instructions to connect the signal to the transmitter and receiver of the remote control. ⑤ Up/down button: vibration and static adjustment. ⑥. LED Flashlight Button: Press this button to turn on the transmitter's LED flashlight. ⑦. Signal channel button: Before connecting the remote transmitter and receiver signals, press this button to select signal channel 1 or 2 as the signal channel of the trainer. ⑧.Control button: After selecting the operating mode, press this button to initiate a training command. ⑨. Mode Button: Includes 4 modes: static, vibration, sound and flash. ⑩. Charging Port: Used to charge the transmitter. ①. Power switch: turns the receiver on/off, connects the signal to the remote control or resets the signal. 2. Contact point (electrode): Install a pair of screw caps (electrode contact points) suitable for dog hair of different thicknesses to effectively conduct static electricity during training. 3. Charging Port: Used to charge the receiver. . Rubber Cover: Cover the receiver after charging. 4. Power Indicator: Shows whether the receiver is on or off. 5. Charging Indicator: Indicates the charging status of the receiver.