DR55B01 Self-locking motor reverse controller module with reverse polarity relay (6-24 V)

1. This is a self-locking (bistable) reverse polarity relay. Trigger once, output reverse polarity (and hold), trigger again, output = input (and hold).
2. Self-locking (bistable) reverse polarity controller, the module can simply control forward and reverse (start and stop is controlled by power on and off).
3. With power indicator and reverse polarity indicator.
4. Low pulse control mode, more convenient to use.
5. Made of high quality electronic components, stable and reliable performance

Specification:

Item type: CW/CCW controller module.
Optional input voltage: DC 5V (5V version), DC 6-24V (12V version)
Module operating current: forward 2MA, reverse 35-40MA
Charging voltage: equal to the output voltage
Charging current: maximum.2A (motor with power indicator and reverse polarity indicator)
Control Mode: Low pulse control
Size: Approx.43 x 21 x 16 mm / 1.7 x 0.8 x 0.6 inches
Weight: 13.5g / 0.5oz (approx.)
Pin Description:
I+: Power input +;
I-: Voltage input -;
O+: Power output + (output in reverse polarity is -);
O-: Power output - (output in reverse polarity is +);
G: Trigger signal ground;
T: Trigger signal input (low pulse of 0.2 to 2 seconds).
Instructions:
1. After powering on, with the output equal to the input, press the trigger button. The output will have reverse polarity. Again the button, output = input, third trigger button, reversed polarity output.And so on.
2 Turn off the power and stop the output.

Package list:

1 CW/CCW controller module

Note:

1. To make the module work stably, be sure to use a power supply that is double the charging power. If the load is a motor, use a power source with more than 3 times the horsepower.2. The maximum charging current is 2A. If it is a charging motor, the maximum charging current is 1A.3. The module can only control forward and reverse (start and stop is controlled by power on and off)