Drip irrigation kit Solar-powered automatic drip irrigation kit Easy DIY automatic watering system for balcony gardens

1. Description of working speed: 01, 02, 03 to 29, 30 cycles (01 operates for 1 minute, 02 operates for 2 minutes, and so on. When the current working speed is reached, the motor stops and switches to intermittent speed.)
2. Description of time interval: 3H, 6H, 12H, 1d, 2d, 3d, 7d cycle (3H for 3 hours, 6H for 6 hours, 1d for 24 hours, 2d for 48 hours, and so on, with the current intermittent time running until the motor starts at working speed.)
3. Water level detection: The buzzer sounds twice per minute, indicating low water. The E1 indicator flashes slowly (it will continue to sound twice per minute until the water level is normal, then the buzzer and alarm code E1 will turn off). The buzzer does not sound at night; only the E1 LED display and the slow flashing light are displayed. When the water level is sufficient, the motor will run; when there is no water, the pump will stop.
4. Motor protection: The E2 indicator flashes slowly, and the buzzer sounds twice per minute. At night, the buzzer does not sound; only the E2 indicator flashes slowly.
5. Battery discharge and overcharge protection: When the battery voltage drops below 10V, the indicator flashes, and the water pump will turn off. During the day, the water pump can only be started when the load is above 10.6V. Charge the battery above 12.45V and disconnect it to protect the battery. During the day, when the battery is below 12V, it will continue to charge to maintain its operation.

Specification:

Item Type: Automatic Solar Drip Irrigation Kit.
Product Model: BSV IC006
Application Environment: Watering flowers and vegetation.
Housing Material: ABS
Weight: Approx. 2292g / 80.8oz
Solar Panel:
Chemical Type: Polysilicon
Production Process: Glass Lamination
Operating Voltage: 18V
Output Power: 10W
Operating Current: 555mA
Rechargeable Battery:
Model: 18650 Battery
Battery Cells: Lithium-ion
Standard Capacity: 2200mAh (comes with built-in battery)
Standard Voltage: 11.1V
Overcharge Protection Voltage: 12.75V
Over-Discharge Protection Voltage: 8.1V
Operating Temperature (Charging): -10°C to 45°C
Operating Temperature (Discharging): -10°C to 45°C
Internal resistance: less than 120mA
Lifespan: 500 cycles
Pump specifications:
Model: Brushed DC water pump
Operating voltage: 12V DC
Flow rate (ml/min): 500-1200
Load current (A): 0.5A
Operating ambient temperature: -10°C to 45°C

How to use:

1. Press the ON/OFF button behind the solar panel to start the product, fill the water injection container with water, connect the water inlet hose filter to the water injection container, assemble the drip irrigation accessories, and insert them into the flower pot. 2. Press the Watering Time button to set the working time and press the Interval button to set the watering time. (with power-off memory)

Package List:

1 x Solar Panel

1 x Controller

1 x Coarse Water Hose

3 x Thin Water Hoses

2 x Brackets

30 x Drip Irrigation Heads

30 x T-Connectors

8 x Screws

4 x Nuts

4 x Expansion Tubes

4 x Expansion Screws

5 x Double Connectors

6 x Accessories

1 x Manual