Durable Two-Color Temperature Correction Thermostat Switch for Cabinets

Features:

1. This temperature controller is designed with a two-color LED display and has a high precision of 0.1℃
2. It supports temperature correction, temperature alarm and delayed start function
3. Designed with screw terminals for convenient and easy wiring
4. The water-resistant probe has higher sensitivity, sealed with silicone, more suitable for liquid temperature detection, safe and durable
5.Widely used for temperature control in cabinets, industrial equipment, vegetable and flower greenhouses, etc.

Specifications:

Features:
This temperature controller is designed with two-color LED display and has a high precision of 0.1℃.
It supports temperature correction, temperature alarm and start function delayed.
Designed with screw terminals for convenient and easy operation. wiring.
The water-resistant probe has higher sensitivity, sealed with silicone, more suitable for liquid temperature detection, safe and durable.
Widely used for temperature control in cabinets, industrial equipment, vegetable and flower greenhouses, etc.
br>Specifications:
Control range -50℃~110℃
Accuracy of control 0.1 ℃
Sensor input Water resistant sensor NTC10K L=0.5M
Temperature alarm -49℃~110℃
Input voltage DC12V
Output type Relay output max.
P0 temperature control mode:
This parameter must be set for the first time using the controller. If used for heating, set it to H; if used for cooling, set it to C.
P1 feedback difference:
Press and hold the SET button to enter the internal setting, select the P1 setting, press the SET button again to set the feedback difference value. (The feedback difference value is the value that the controller restarts after reaching the set temperature and stopped.For example, if we use heating mode, make the controller stop at 40℃ and restart at 35℃, the feedback difference value is 5)
P2 Temperature correction:
This function is used for temperature correction, if there is a deviation between the measured temperature and the actual temperature. Correction temperature = measured temperature + correction value.
For example, if the measured temperature is 25.6 degrees and the actual temperature is 25.8 degrees, set P4 to 0.2, so the final temperature is 25.6 + 0.2 = 25.8 degrees
P3 Delayed Start:
This function is normally used for compressor refrigeration. If the controller is used in fridge freezers this value must be set. Depending on the compressor back pressure, this value can be set between 3 and 6 minutes.If you do not use it to control the compressor or do not need delay function, you can ignore it.
Temperature alarm P4:
Set the temperature alarm value, when the real-time temperature exceeds this value, the display will flash to trigger an alarm.
Heating mode setting example:
Control the electric heating equipment to stop heating at 35 ℃ and restart when the temperature drops to 30℃;
1, press and hold the SET button for 3 seconds. To enter the internal setting, set P0 to H.
2, press and hold the SET button to return to real-time temperature display, press the SET button again and the green screen flashes, then adjust the value to 35℃.
3, the default feedback difference is 2, it should be set to 5 if you want to restart at 30℃.Press and hold the SET button to enter internal setting, select P1, change the P1 value to 5.
Cooling mode setting example:
Control the air conditioning refrigeration to stop cooling at 23℃ and restart when the temperature reaches 27.℃;
1, press and hold the SET button for 3 seconds to enter the internal setting, set P0 to C.
2, press and hold the SET button to return to the real-time temperature display, press the SET button again and the green screen flashes, then adjust the value to 23 ℃.
3, the default return difference is 2, it should be set to 4 if you want to restart at 27℃.
Press and hold the SET button to enter internal setting, select P1, change the P1 value to 4.
Package includes:
1 x temperature controller

-Contact our customer service in case you need further assistance