Thermostat Socket, Temperature Controller, Programmable Digital Timer with Probe, Thermostat Socket for Greenhouse Heating, Aquarium 1 pc.

Intelligent Temperature Controller: Temperature control range: 20℃-60℃, temperature control accuracy: ±1%. The temperature control socket can automatically switch between heating and cooling modes by setting the temperature start and stop device to control heating/cooling during the work process.

Multifunction: The LCD screen can display the temperature control mode. It also features temperature correction, screen lock protection, and storage (saves all current settings after a power failure).

Intelligent Time Control: This thermostatic socket can detect the temperature, set the switching temperature, and features cycle time control, on/off, and timer functions. Time range: Range: 0-99 hours and 59 minutes.

Time accuracy: up to 10 minutes. Operating voltage: 250 (V); 1.8m Temperature Probe: The temperature monitoring socket comes with a 1.8m cable temperature probe for connection to the measuring point. The temperature detection range is 20℃ to 60℃.

Multiple Uses: The digital temperature control socket can intelligently control temperature and time. Widely used in greenhouses, aquariums, carbon crystal heaters, thermostatic switches, portable air conditioners, and smart controllers, etc. Aquaculture, for example, to heat the walls of houses.

Product Details

Control method: intelligent temperature controller

Measures the temperature of an object

Temperature range: -40-120 (℃)

Temperature measurement error: ±0.1 (℃)

Aperture size: 1 (mm)

Installation type: 1

Output signal: 1 (mA)

Package contents: thermostat*1

Product Description

Real-time temperature range: -40-120°C.

1. Open circuit (or below -45℃). The first line of the display flashes "E1" and displays -40~45℃-40℃.

2. Short circuit (or over 120℃) The first line of the display flashes "E2", 121~129℃ displays 120℃.

3. Niediger is at -10℃ or above 100℃. Values after the decimal point are not displayed.

4. In cooling mode, when the set temperature is higher than the stop temperature, the corresponding symbol will be displayed.

5. Heating mode, when the set start temperature is lower than the stop temperature, the heating mode will be displayed on the corresponding symbol.

Mode Button:

Press the MODE button, the LCD display shows: temperature control mode-timer control mode F01~F04.

F01: Cycle timing mode, cycle start time (NO)/stop time (OFF).

F02: Countdown mode, keeping Ti.s OFF, delay (start time) ON.

F03: Countdown mode is disabled. At this time, Ti.s is activated, delay (stop time) is deactivated, the countdown is completed, the output is deactivated, and the operation ends.

F04: Countdown mode is disabled. Now Ti.s is deactivated, the delay (start time) is activated, the delay (stop time) is deactivated after starting, the stop time completes the countdown, turns off the output and ends the process.

Digital Temperature Control Socket Features:

Timer Function

Cycle Time and Countdown

Heating/Cooling

Temperature Correction

Screen Lock Function

Memory Function: Saves all current settings after a power failure