Einhell 4461000 TE-BF 18 Li - Solo Power X-Change Belt File 18V Naked

After using it for 3 days in a row I am very satisfied with it, however the sanding belt is slightly lacking in width however in terms of price it is an excellent tool with a powerful motor which does not struggle when used from way to force what we are looking for in the tools we buy in addition to that there are around ten tapes with several different grains really After using it for 3 days in a row I am very satisfied with it, however the tape sanding machine slightly lacks width however at the price it is an excellent tool with a powerful motor which does not struggle when you use it to force what you are looking for in the tools that you buy really great!

Good morning, This review concerns the TE - BF 18 Li-Solo electric file The brand: Einhell is a German brand manufactured in China. It designs tools in a wide range: That is to say: from entry level for the general public to more “pro” tools. the tools are generally of good quality, but the range being extensive, there are significant differences for each type of tool, from the simplest to the most sophisticated or efficient. The electric file is one of the mid-range tools. - the file comes in a sturdy, thick fabric bag. - the file comes with a set of strips in 9mm and 13mm thickness (6 of each). - the file is delivered naked: without battery or charger, to choose from the Power-X-change range. The choice between a 9mm strip or a 13mm strip is made by replacing the strip table using a simple screw that can be removed without tools. Once this choice is made, the band is simply put in place and the band tension is automatic and efficient. You must then choose the rotation speed using a wheel with marks from 1 to 10. You can adjust the orientation of the strip in relation to the handle, this must be done when stationary. If necessary, a sawdust suction pipe can be connected. You can then start the sander using a trigger. the grip is good with the bi-material handle, and the battery helps balance the weight of the tool. I tested this tool with a 2.0Ah battery, sufficient for this type of tool. The work is precise, and you can, if necessary, adapt the speed during operation with your thumb or the other hand. The casing is well done and not too intrusive on the work area, which allows you to see your work clearly and get close to the tool if necessary. I regret a few points that could be improved, but nothing serious overall. - the fabric bag could contain pockets for storing tapes, too bad there aren't any. - a rigid box could also have been an alternative to the fabric bag. - the lower table is a little short, it could have been extended by a few cm. The electric file is a complementary tool to a belt sander which does not fit in small spaces, or to a set of wood chisels or a jigsaw to facilitate the creation/finishing of mortises. For the budget: at the time of my purchase, it was positioned around €105, therefore below the average price of other big brand tools and above the "entry level" brands. A very competitive price for an Einhell tool of this quality. It will therefore complement the range of tools of an informed or demanding DIYer because it allows an impressive speed of execution of finishing tasks. Once you discover this tool: you adopt it and use it very often. I would therefore conclude that it is a good gift idea to complete a handyman's tool range.

I am very satisfied with the performance of the file. This tool is extremely powerful and efficient for sanding different surfaces. The Einhell band file is very easy to use thanks to its ergonomic design and comfortable handle. In addition, it is equipped with a quick change system for the sanding belt, which saves time during work. I was impressed with the quality of finish it provides, leaving surfaces smooth and even. I highly recommend the Einhell Band File to anyone looking for a high-performance tool. Note, however, that its motor makes a little noise and that it is non-bruchless.

Good morning, The Einhell belt sander, file type, has been tested on metal and wood. As for the sander itself, it is made entirely of very good quality plastic. Installing the strips is simple: just start at the side of the handle and finish at the end. There is a notch to pass through the side of the handle to properly position the strip. -On metal, car body type with a thickness of 8/10, it is perfect for accessing corners and other difficult places. -On soft or hard wood, it also works very well. Its use is exclusive for finishing in corners or difficult to access places. The big advantages are the possibility of adjusting the power of the machine using the variator, which allows precise adjustment. It comes with two heads of different widths for wide or thin strips. The heads are installed using a simple screw, which is really well thought out. In addition, the head is adjustable using a simple screw, again very well designed. The only fault I found is the wheel which allows you to tension the band once it is in place. I find that the dial is a little too easy to unlock, it is really too flexible. That said, in all my tests, it has not moved and the bands are very well tensioned. Thank you for reading.

I just tried the belt file and it seems to be exactly what I was looking for.