Electric desoldering pump with portable desoldering pump

General Description

The 842A electric desoldering pump is an essential tool for removing components from printed circuit boards without damaging the boards or components. With a sleek design, it is easy to use and ideal for replacing integrated circuits and multi-pin switches. This pump can also be used as a soldering iron, making it indispensable for electronics professionals and hobbyists alike.

Technical Specifications

• Power Supply: 220V, 50Hz

• Power: 30W

• Equipped with two suction nozzles of different diameters

Installation

• Turn on the power and preheat for 3 to 5 minutes.

• Check that the voltage is constant before use.

• Ensure that the cylinder and suction nozzle are securely attached to prevent leaks.

Operation

• Push the piston handle and point the suction nozzle at the molten solder.

• Press the control button to draw the solder into the cylinder.

• After use, push the piston 3 to 4 times to remove any remaining solder.

• Frequently remove welding debris from the nozzle and cylinder.

• Add a little oil to the piston regularly.

Other information:

• It is normal to see a little smoke during the first use; this will disappear after ten minutes.

• Do not install or remove electrical parts while the device is switched on.

• Use a natural cooling base during operation.