Electric desoldering pump with portable desoldering pump

General Description: The 842A electric desoldering pump is an essential tool for removing components from printed circuit boards without damaging the boards or components. With a sleek design, it is easy to use and ideal for replacing integrated circuits and multi-pin switches. This pump can also be used as a soldering iron, making it indispensable for electronics professionals and hobbyists alike. Technical Specifications: Power Supply: 220V, 50Hz; Power: 30W; Equipped with two suction nozzles of different diameters. Installation: Turn on the power and preheat for 3 to 5 minutes. Check that the voltage is constant before use. Ensure that the cylinder and suction nozzle are securely attached to prevent leaks. Operation: Push the piston handle and point the suction nozzle at the molten solder. Press the control button to draw the solder into the cylinder. After use, push the piston 3 to 4 times to remove any remaining solder. Frequently remove welding debris from the nozzle and cylinder. Add a little oil to the piston regularly. Other information: It is normal to see a little smoke during the first use; this will disappear after ten minutes. Do not install or remove electrical parts while the device is switched on. Use a natural cooling base during operation.