Electric soldering iron with suction power for tin soldering

Features:

1. Used for various electronic soldering and tin suction.
2. It is convenient to remove the components to be replaced from the board without damaging the components and the board.
3. Can be used to replace integrated circuits, multi-pin switches, etc.
4. This box can be used as an electric soldering iron. It is an indispensable tool for national defense, scientific research, communication, aerospace, computer, radio, television, electronic professional maintenance personnel and the majority of radio enthusiasts.
5. The medium size is easy to hold and suitable for one-handed use.

Specifications:

Features:
1. Used for various electronic soldering and tin suction.
2.It is convenient to remove components to be replaced from the board without damaging the components or the board.
3.Can be used to replace integrated circuits, multi-pin switches, etc.
4.This box can be used as an electric soldering iron.It is an indispensable tool for national defense, scientific research, communications, aerospace, computing, radio, television, professional electronics maintenance personnel, and most radio enthusiasts.
5. The medium size is easy to hold and suitable for one-handed use.
Specifications:
Condition: 100% Brand New
Item Type: Soldering Iron
Material: Plastic Handle + Stainless Steel Tube
Power: 30W
Temperature Setting Range: 400°C
Package List:
1 * Soldering Iron
1 * Nozzle
1 * PCB Needle
Note:
1. Please allow slight error due to manual measurement. Thank you for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Instructions:
1. Turn on the power and heat for 3-5 minutes.
2. Push the plunger handle down and the front end of the suction soldering iron nozzle is aligned with the solder joint of the component to be removed. Once the solder is melted, press the control button and the solder is drawn into the intake cylinder.
3. The suction device is equipped with two nozzles of different diameters, which can be selected according to the thickness of the component cables.
4. When soldering, same operation as with an electric soldering iron
5.When disassembling the pneumatic cylinder, press the upper end of the pneumatic cylinder downward according to the direction of the arrow. When the pneumatic cylinder and the handle are separated, the pneumatic cylinder can be separated. When the suction nozzle is removed, the suction nozzle rotates counterclockwise relative to the suction nozzle. Deletion Considerations
7. Before use, tighten the suction nozzle and air cylinder to avoid air leakage, otherwise it will affect the absorption effect of the tin.
8. Frequently remove the solder impurities entering the nozzle and gas cylinder, and add a little oil to the piston.
9. After each use, push the plunger 3-4 times to remove the solder residue in the straw, so that the nozzle and straw are unblocked for the next use.
10.Once the vacuum device is powered on, it is strictly forbidden to install or disassemble its electrical parts.
11.When the new soldering device is used for the first time, it may emit slight smoke due to the heating element heating up.This is a normal phenomenon that will disappear naturally after ten minutes.
12.During use, the soldering iron's stand, which has a natural heat dissipation structure, must be used and placed in the base of the soldering iron.
13.If the power cord is damaged, it must be replaced by the manufacturer, its service department, or a similar professional to avoid any danger.
14.This product has a ground wire; it must be used with a grounded outlet. Please take care when using it for safety.