Electrical Cable Tester, Cable Detector, Ethernet Network Cable Detector, Transmitter: 1254929mm Receiver: 1753824mm

Product Advantages: The versatile communication line detector is designed and manufactured with unique data transmission technology. It has three functions: line finding, line alignment, and breakpoint detection. It is a valuable tool for engineers and technicians involved in the installation and maintenance of communication lines. It can be widely used in telephone systems, computer networks, and for daily maintenance, troubleshooting, and troubleshooting of metal lines. It is equipped with LED lights and headphones, making it convenient for use in dark and noisy environments. The test line is configured separately for ease of use. Product general: Telephone line hunting: Directly plug the telephone line with crystal head into the RJ11 telephone line hunting interface, or directly connect the red and black lines of the clamp crocodile to the two lines of the phone respectively, and turn the function switch of the transmitter to “SCAN” position, the “STATUS” chase indicator flashes, indicating that the transmitter is working normally, press the receiver's jog button and use the receiver's probe to search for the required target cable.Open or Short Test:Turn the transmitter's function switch to the TEST position and hold down the function (SELECT) button on the transmitter for 2 seconds. At this time, the VERIFY light changes from flashing to solid. Use the two clips of the alligator clip. to tighten the test button respectively. If both ends are shorted, the first light in the vertical row of the emitter will be lit, and the smaller the resistance, the brighter the light; if the circuit is open, the light will not be on. Rereading the network lines: Connect the RJ45 connectors at both ends of the test at the corresponding interfaces of the transmitter and receiver respectively; turn the transmitter function switch to the "TEST" position and the VERIFY test indicator flashes, indicating that the transmitter operates normally; according to the 18 lines Sequence indicators to judge the characteristics of line short circuit, open circuit and crossover. During the test, you can press the function button (SELECT) to switch between fast measurement and slow measurement.Searching for network lines:Directly insert the network cable with crystal head into the RJ45 network hunting interface, turn the function switch of the transmitter to the "SCAN" position, and The "STATUS" tracking indicator will flash, indicating that the transmitter is functioning normally. Press and hold the receiver's Jog button and use the receiver's probe to probe the required target cable. The detection range of the network cable direction function can reach a range of 1 meter. (Depending on the environment). Headphone function: In noisy environments, you can wear headphones to avoid external interference and affect judgment. Light function: In dark environments, flip the switch and the receiver's LED light will illuminate the work area. Power supply: 6F22 type 9V battery*2 (This product does not include batteries) Product size: Transmitter : 125*49*29 mm Receiver: 175*38*24 mm Product Weight: Transmitter: approx. 92 g (without battery) Receiver: 58 g (without battery) Standard Configuration: transmitter (without battery), receiver (without battery), leather case, RJ45 adapter cable, earphoneNote: All data is measured manually, please allow 1-3 cm error. Due to differences in lighting and display, there may be some color variation; the actual product received shall prevail.