Emergency stop button with 2 momentary push buttons and emergency stop - T-2M

General Description

T-2M series push button switch, designed for 50Hz AC applications, with a rated voltage less than 500V and a rated current less than 15A. Ideal for environments exposed to rain, snow, and dust, it is particularly suitable for electric cranes and hoists, as well as remote control systems.

Technical Specifications

• Rated Voltage: Less than 500V
• Rated Current: Less than 15A
• Temperature Conditions: -5°C to +40°C
• Altitude: Up to 2000m
• Relative Humidity: Up to 50% at +40°C, 90% at +20°C
• Pollution Level: Level 3
• Installation Category: Class II
• Contact Resistance: Less than or equal to 50MΩ
• Mechanical Life: 1 million cycles (instantaneous type), 50,000 cycles (emergency stop button) self-locking)
• Electrical life: 50,000 cycles (self-locking emergency stop button), 500,000 to 1,200,000 cycles (other)
• Protection rating: IP65

Installation

The emergency stop button must be installed in an environment free from significant vibration, shock, and excessive humidity. It is designed for mounting in areas free from explosion hazards and corrosive gases.

Operation

The emergency stop button is easy to use thanks to its one-handed operation. It is equipped with a mushroom head for quick and intuitive activation. After activation, the button must be rotated or reset to return to its normal state.

Other information

• Injection-molded ABS plastic housing
• Standard silver contacts for good electrical conductivity
• Directional marking on the button head for easy use