ETCR1860C 40 V 1 kV Non-contact high voltage wrist alarm for electrical maintenance

General Description

This ETCR1860C non-contact high-voltage wrist alarm is designed to ensure operator safety during electrical maintenance. It offers ultra-sensitive voltage detection from 40V, with non-contact detection technology that guarantees accurate and long-lasting alarms. Its battery life can reach up to 12 months in standby mode, making it a practical tool for professionals.

Technical Specifications

• Item Type: High Voltage Alarm
• Material: ABS
• Voltage Range: 40 V - 1 kV
• Alarm Distance: 5 cm at 110 V, 10 cm at 220 V, 15 cm at 600 V, 40 cm at 1 kV, 60 cm at 1 kV
• Distance Error: ±10 cm (23℃±1℃, 80% RH)
• Operating Frequency: 50/60 Hz
• Test Mode: Non-Contact
• Battery Life: Approximately 24 hours continuous operation, approximately 12 months standby
• Mode Alarm: LED visible below 8000 LX, buzzer above 60 dB (distance 60 cm)
• Protection rating: IP54
• Operating environment: -10°C to 40°C, less than 80% RH
• Storage environment: -10°C to 60°C, less than 70% RH

Usage

• Wear the alarm on bare skin on the wrist, keeping the casing close to the skin.
• Ensure the triangular symbol on the surface of the alarm point is facing your fingertips.
• Do not use the alarm as a voltage detector.
• In case of rain, remove the battery and dry the alarm in a cool place.
• Do not use the alarm in a wet condition, as this can significantly reduce its Range.
• Test the alarm after a shock to ensure it is working properly.
• Read the manual carefully after purchase.

Other Information

• Package List: 1 x High Voltage Alarm (battery not included), 1 x Manual, 1 x Button.