Ethernet cable tester, fault distance location and cable length testing using TDR technology, 2.5" color screen RJ45 network tester with carrying case

【Anti-Interference Digital Cable Scanning】Advanced digital cable scanning technology, anti-interference, no noise, high sensitivity, stronger and more stable than ordinary analog signals. The network cable tester can be used for all types of PoE switches, supports a voltage of 60V, and offers greater compatibility. This instrument is suitable for network cables with an RJ45 interface, and the reception sensitivity is adjustable. [Length Measurement/Fault Distance Location] The FY8176 network tester uses TDR (Time Domain Reflectometer) technology to measure the length of network cable/telephone line/BNC coaxial cable and fault point cable without calibration. It offers fast response, high accuracy, a wide range, and a measurement distance of up to 400m/1312ft, supporting length units of ft/m/switch. Note: The measurement must be performed with an open circuit. [Wiremap Function] The Ethernet cable tester can test the physical connection status of the cable under test, such as wire sequence, open circuit, short circuit, bad pair, reversed connection, etc. [User-Friendly Design] The Ethernet tester transmitter features a 2.5-inch color screen for clear reading even in dark environments, and the exterior is encased in soft rubber for a comfortable feel and protection against drops from 2 meters. The receiver is equipped with a flashlight for easy use in the dark. The package includes a fabric bag for easy storage and transport. 【Battery Undervoltage Reminder】Transmitter Undervoltage Alert: When the transmitter battery voltage is lower than the operating voltage, the screen displays the battery symbol. Please replace the battery promptly. RECEIVER BATTERY VOLTAGE INDICATION: When the receiver indicator light goes out or the search line signal becomes weak, replace the battery promptly. Specifications: Model: FY8176 Operating Temperature: 0~40℃, maximum 80% relative humidity (non-condensing). Storage Temperature: -10~50℃, maximum 80% relative humidity (non-condensing, without battery). Altitude: <2000m Explosion-proof type: IP40 Line search function: network cabling Cabling plan test function: detection of the physical connection of the network cable. Anti-drop sheath: √ Cable length test: 2m-400m Network cable break point: √ Sensitivity modulation: √ Transmission signal: >300m POE: 60V voltage Flashlight: √ Battery: Transmitter: 3*1.5VA AA Battery (not included); Receiver: 3*1.5VA AA Battery (not included) Material: ABS Transmitter size: 144*74*31mm/5.67*2.91*1.22inch Receiver size: 198*43*32mm/7.79*1.69*1.26inch Transmitter weight: 167g/5.89oz Receiver weight: 110g/3.88oz Package size: 22.8*14.3*5.4cm/8.98*5.63*2.12inch Package weight: 477g/16.82oz Package list: 1*Transmitter 1*Receiver 1*RJ45 adapter cable 1*Cleaning bag 1*User manual (English)