Ethernet Cable Tester, Fault Locating and Cable Length Measurement via TDR Technology, 2.5-Inch Color Display, RJ45 Network Tester with Carrying Case

【Interference-Free Digital Cable Sampling】Advanced digital cable sampling technology, interference-free, noise-free, high sensitivity, more powerful and more stable than traditional analog signals. The network cable tester is suitable for all types of PoE switches, supports a voltage of 60V and offers wide compatibility. The device is suitable for network cables with RJ45 connectors and the reception sensitivity is adjustable. [Length Measurement/Fault Location] The FY8176 network tester uses TDR (Time Domain Reflectometer) technology to measure the length of network cables, telephone lines, BNC coaxial cables and fault location cables without calibration. It offers fast response times, high accuracy, a wide measurement range and a measurement distance of up to 400 m (1312 ft). The length measurement units are feet/m/switch. Note: Measurements must be made without a load. [Wiremap Function] The Ethernet cable tester checks the physical connection status of the cable under test, such as wire configuration, breaks, short circuits, faulty wire pairs, reversed connections, etc. [User-Friendly Design] The Ethernet tester transmitter features a 2.5-inch color display for good readability even in the dark. The housing is coated with soft rubber, providing a comfortable feel and protection against drops up to 2 meters. The receiver is equipped with a flashlight for easy use in the dark. A fabric case is included for easy storage and transport. [Low Battery Warning] Transmitter low battery warning: When the transmitter battery voltage drops below the operating voltage, the battery symbol will appear on the display. Please replace the battery immediately. Receiver battery indicator: When the receiver indicator light goes out or the search signal becomes weak, replace the battery immediately. Specifications: Model: FY8176 Operating temperature: 0~40℃, maximum relative humidity 80% (non-condensing). English: Storage temperature: -10~50℃, maximum relative humidity 80% (non-condensing, without battery). Altitude: <2000m Explosion protection rating: IP40 Cable tracing function: Network wiring Wiring plan test function: Detection of the physical connection of the network cable. Drop protection sheath: √ Cable length test: 2m-400m Network cable break point: √ Sensitivity modulation: √ Transmission signal: >300m PoE: voltage 60V Flashlight: √ Battery: Transmitter: 3 x 1.5VA AA batteries (not included); Receiver: 3 x 1.5VA AA batteries (not included) Material: ABS Transmitter size: 144 x 74 x 31 mm Receiver size: 198 x 43 x 32 mm Transmitter weight: 167 g Receiver weight: 110 g Package size: 22.8 x 14.3 x 5.4 cm Package weight: 477 g Package contents: 1 x transmitter, 1 x receiver, 1 x RJ45 adapter cable, 1 x cleaning bag, 1 x user manual (English)