Fireplace and Stove Accessory, 6 Blades Wood Stove Fan, Heat Powered Fireplace Fan with Thermometer, Eco-Friendly for Wood/Fireplace/Gas/Stove Logs Fireplace and Stove Accessory

【Upgraded 6-Blade Fireplace Fan】Compared with ordinary 5 or 4 blade fireplace fans, the upgraded 6-blade stove fan heats up faster and has more air volume, is made of anodized aluminum, when the fireplace fan gets hot Will not rust or corrode. With a solid base,It will not shake or tip over even at maximum wind speed. A magnetic thermometer is included to monitor the oven temperature.
【Energy Saving and Environmental Protection】This heat powered stove fan does not require batteries or electricity and is designed to circulate the warm air produced by wood/coal or pellets. The 6-blade heat fan efficiently circulates the heat generated by the fireplace while increasing stability, has been tested and proven to save 37% on fuel costs and reduce wood consumption in the stove.
【Longer Service Life & Overheat Protection】The stove fan is equipped with a high temperature resistant chip, Usually the fan rotates around 55°C -75°C. When the temperature reaches about 250°C to 300°C, the fan has the highest rotation efficiency. If the surface temperature exceeds 350°C, there is a safety device bimetallic at the bottom of the fan, which will raise the front of the fan to protect the motor.
【Quiet and easy to use】 No installation required, just put it on the top of the stove, and the quiet working noise is less than 35DB. Use a thermometer to measure the temperature where the fan is placed, it can be used directly in the range of 80°C to 300°C, and the thermometer can be close to the fan for temperature monitoring. (Magnetic thermometers generally have a temperature difference of about 20°C.)
【Notes】 1. It is very hot to operate the wood stove fan. Do not hold the fireplace fan directly with your hands. When moving or carrying the fan, please wear gloves or cool it down before moving it.
2. Do not place it where children or pets can easily touch it.