FloPlast 20mm MDPE Compression End Cap Fitting Blue

FloPlast Compression MDPE End Cap Fitting – 20mm

This end cap fitting provides a strong and secure end to an MDPE pipework system.

Floplast range of MDPE fittings are suitable for use above and below ground for mains cold water supplies.

High impact resistant body and nut enable it to absorb thermal and mechanical stress.

The fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring, and nitrile seal.

Excellent pressure resistance, tested to 48 bars. Conformably exceeds the water requirements of the UK water bylaws scheme.

A few turns of the nut create your compression joint with the grab ring taking hold.

Other Sizes Available: 20, 25 & 32mm

Technical Specifications:

Compression MDPE End Cap Fitting
Manufactured to BS 6572:1985 (Blue)
Compact Design
WRAS Approved (Water Regulations Approval Scheme)
Material: Polyethylene
Brand FloPlast
Female Adaptor
Colour: Blue
Pressure Resistance
High Impact Resistant Cap
Size – 20mm
Please Note: To maintain a rigid and reliable joint connection, it is highly advised that a pipe liner (also known as a stiffener or insert) is also used, these can also be purchased.