FS400-SHT3X digital temperature and humidity probe, copper and plastic housing, I2C output (SHT30)

Specifications: Condition: 100% Brand New Product Type: Temperature and Humidity Sensor Model: FS400-SHT30/31/35 Operating Current: < 10 mA Temperature Measurement Range: -20 ℃ ~ 100 ℃ Humidity Measurement Range: 0 ~ 100% RH Operating Conditions: -40 ~ 120 °C, 0 ~ 99% RH Storage Conditions: -20 ~ 80 °C, 0 ~ 95% RH Housing Material: Copper, Plastic Cable Length: Approx. 150 cm / 59.1 inches Weight: 115.8 g / 4.1 oz Package Size: Approx. 20 x 14 x 3.7 cm / 7.9 x 5.5 x 1.5 in Optional Type: SHT30, SHT31, SHT35 Package List: 1 x FS400-SHT3X Temperature and Humidity Sensor 1 x Cable Note: Operating Conditions: The sensor performs normally within the recommended operating range. Prolonged exposure to conditions outside the normal range, especially humidity levels of ≥ 80%, may cause temporary signal drift (drift after 60 hours - 3% RH). Return to Normal State: Once the operating conditions are exceeded, the sensor will slowly return to its calibration state. Prolonged use under abnormal conditions will accelerate product aging. Storage Conditions and Instructions: Humidity sensors are not ordinary electronic components and require careful protection. This should be taken seriously by the user. Prolonged contact with high concentrations of chemical odors will cause a deviation in the sensor reading. 1. Temperature measurement range: -4 ~ 212 °C (-20 ~ 100 °C); Humidity measurement range: 0 ~ 100% RH. 2. Operating conditions: -40~248 °C, 0~99% RH; Storage conditions: -4 ~ 176 °C, 0 ~ 95% RH. 3. The FS400-SHT3X temperature and humidity sensor probe offers high reliability and long-term stability and can be self-calibrated internally. 4. The digital temperature and humidity sensor is closely linked to the temperature and humidity for easy measurement. Cable length: approximately 150 cm. 5. The I2C serial interface is easy to integrate. The sensor's digital design allows for resolutions up to 14 bits.