Fuel pressure gauge 0-140 psi, TU-114 fuel pressure tester kit, fuel injection pump pressure tester kit, gasoline diagnostic tool for cars, trucks, and motorcycles

Universal design: The fuel pressure gauge tester kit is suitable for most vehicles equipped with gasoline injection pumps (gasoline engines), such as: cars, trucks, SUVs, motorcycles, off-road vehicles, motorhomes, etc. Suitable for various gasoline engines (Bosch, CIS Jetronic, GM) (excluding vehicle intake throttle systems). Not suitable for high-pressure diesel injection pumps or direct injection engines. Ideal choice: 3-1/2 inch scale, measuring range 0–140 psi/0–10 bar, two-color scale, easy to read. Fuel injection pump pressure test, injection pressure gauge test, fuel injection device test for motor vehicles, to check if fuel is present. The fuel supply and injection system is functioning normally, allowing you to determine if there are damaged parts inside or faults in the oil circuit. It is an ideal choice for professional mechanics. Essential kit: Use various fittings and hoses to check connections. Comes with M8/M10/M12/M14 adapters, a 15-inch (1/4-inch SAE) L-hose, and an 8-inch L-hose. (M60) and an aluminum T-fitting. This fuel injection pump pressure test kit helps detect most fuel system problems in vehicles, a must-have for the DIY enthusiast or professional mechanic. Convenient and safe design: The fuel pressure tester with a quick-change valve button allows for one-handed operation for inflation and deflation and features a convenient and safe design. Versatile: The 15-inch hose easily connects to any standard 1/4" Schrader valve. The 8-inch hose fits all M6 fuel pressure testing fittings. M8, M10, M12, and M14 adapters ensure this tool set can be used on a wide variety of vehicles, trucks, motorcycles, etc. Special features: -The fuel pressure testing kit is suitable for most vehicles equipped with gasoline injection pumps (gasoline engines), but not for high-pressure diesel injection pumps or direct injection engines. Large 3-1/2" graduated dial, measuring range 0-140 psi/0-10 bar, two-color scale for easy reading. - The fuel pressure tester with quick-change valve button allows for one-handed operation for inflation and deflation. Specifications: Material: Alloy Measuring range: 0 ~ 140 PSI (MPa) Product dimensions: 28 x 21 x 7 cm Model: TU-114 Product weight: 1.3 kg Scope of application: Fuel pressure detection for motor vehicles Scope of delivery: (as shown in the picture) 1 x 3-1/2" pressure gauge with large dial 1 x 15" long hose with 1/4" brass fittings 1 x 8" short hose with 1/4" male x M6 brass fittings 1 x T-piece 13 brass fittings 2 x hoses (1/4" x 3-1/2" L, 3/8" x 3-1/2" L) 2 hose clamps 1 blue case Note: This is primarily used for gasoline engines, not diesel engines. Please confirm compatibility before purchasing.