Fully automatic digital multimeter clamp, 28 mm jaw opening, 6000 counts, 1.6-inch LCD screen, multiple measurement functions including NCV function

General Description

The digital clamp meter is a versatile and efficient measuring tool. It can measure alternating current (AC), alternating and direct voltage (AC/DC), resistance, capacitance, relative value, maximum/minimum values, frequency/duty cycle, as well as perform voltage under load, continuity and diode tests. With a 28mm nozzle opening, it can measure current without touching or interrupting the circuit, providing great practicality. Equipped with a 1.6-inch LCD screen with backlight (activatable/deactivatable), it ensures clear reading of the measured data. The data retention feature allows measurements to be retained, making it easier to verify or observe. It is powered by two 1.5V AAA batteries (not included) and comes with a pair of test probes and a zipper bag for storage, providing convenient use and easy transportation.Thanks to its high reliability and precision, it is truly useful for testing and maintaining electrical equipment.

Technical Specifications

• Material: ABS
• Safety Classification: CAT II 600V, CAT III 300V
• Maximum Display Count: 6000
• Nozzle Opening: 28mm
• Auto Shut-Off: 15 minutes
• Range: Auto
• AC Current Measurement:
  • Range: 6.000A / 60.000A / 600.0A
  • Resolution: 0.001A / 0.01A / 0.1A
  • Frequency: 50Hz
  • Frequency resolution: 0.1Hz
• AC Voltage Measurement:
  • Range: 6.000V / 60.00V / 600.0V
  • Resolution: 0.001V / 0.01V / 0.1V
  • Frequency: 10Hz - 10kHz
  • Frequency resolution: 0.01Hz - 0.01kHz
• DC Voltage Measurement:
  • Range: 600.0mV / 6.000V / 60.00V / 600.0V
  • Resolution: 0.1mV / 0.001V / 0.01V / 0.1V
• Resistance Measurement:
  • Range: 600.0Ω / 6.000Ω / 60.00kΩ / 600.0kΩ / 6.000MΩ / 60.00MΩ
  • Resolution: 0.1Ω / 0.001kΩ / 0.01kΩ / 0.1kΩ / 0.001MΩ / 0.01MΩ
• Capacitance Measurement:
  • Range: 6.000nF / 60.00nF / 600.0nF / 6.000µF / 60.00µF / 600.0µF / 6,000mF / 60.00mF
  • Resolution: 0.001nF / 0.01nF / 0.1nF / 0.001µF / 0.01µF / 0.1µF / 0.001mF / 0.01mF
• Frequency measurement:
  • Range: 10Hz - 0.01MHz
  • Resolution: 0.001Hz - 0.01MHz
• Duty cycle measurement:
  • Range: 0.1% - 99%
  • Resolution: 0.1%
• Continuity Measurement:
  • Range: 600Ω
  • Resolution: 0.1Ω
• Diode Measurement:
  • Range: 6.000V
  • Resolution: 0.001V
• Operating Temperature: 0 - 30°C (humidity ≤ 80%RH), 30 - 40°C (humidity ≤ 75%RH), 40 - 50°C (humidity ≤ 45%RH)
• Storage Temperature and Humidity: -20 - 60°C, ≤ 80%RH
• Altitude: 2,000 meters
• Power Supply: 2 * 1.5V AAA batteries (not included)
• Item Dimensions: 215 * 63.5 * 36mm / 8.46 * 2.5 * 1.41 inches
• Item Weight: 283g / 10.01 oz
• Package Weight: 372 g / 13.3 oz
• Package Dimensions: 23.5 * 9.2 * 5.3 cm / 9.25 * 3.62 * 2.09 inches

Included Accessories

• 1 * Clamp Meter
• 2 * Test Probes
• 1 * Storage Bag
• 1 * Manual (English)

Usage

1. AC Current Measurement: Open the jaws of the clamp and grip the conductor whose current you want to measure.

   Safety Advice

   • Safety Classification: Observe CAT II 600V and CAT III 300V safety classifications when using.
   • High Voltage Measurement: Exercise caution when measuring high voltages and always use dry hands.
   • Test Probes: Ensure that the test probes are in good condition and correctly connected before each measurement.
   • Storage: Store the clamp meter in the supplied bag in a dry place at room temperature when not in use.
   • Batteries: Replace the batteries when the meter indicates low voltage and remove them if the meter will not be used for an extended period.