Garage door remote control 433 868 MHz RX Multi 300-900 MHz AC/DC 9-30 V remote control

Specifications: 1) Operating range: 50-150 meters.
2) Very small size: 5.5 cm x 4.5 cm x 1.0 cm.
3) One receiver can work with 400 codes.
4) No interference with other remote controls and receivers.
5) Brand selection: With 8 DIP switches, the user can create different combinations for different remote control brands. Voltage input selection: The receiver can work with AC/DC 9V ~ 30V. However, it is better to change the PIS according to the power consumption. If the input voltage is higher than 24V, short pins 2 and 3; Shorten channels 1&2 if the input voltage is below 24V.

Color: white + black
Material: ABS
Programming a new remote control
1) Select the correct brand of remote control to be programmed by sliding the DIP switches UP or DOWN. For example, for 433.92MHz remote controls, simply slide DIP switch 7 UP.
2) Press the learn button. The LED will light up.
3) Press the button on the remote control. The LED will flash 4 times. This means the remote control has been successfully programmed.
4) Repeat step 2 for another button.
5) The procedure for programming the 2nd channel is the same.
Delete all data on the memory card: Press and hold one of the learn buttons. The LED will start flashing. Keep the button pressed until the LED goes out. All data stored on the memory card will be permanently deleted and cannot be recovered.
Compatible Brands:
All remote controls with a 433.92 MHz fixed code.

Scope of delivery:
1 x Receiver
3 x Remote Controls

Only the above package content, other products are not included.
Note: Light reflection and different screen settings may cause the color of the item to differ slightly from the original. The allowable measurement error is +/- 1-3 cm.