Garage Door Remote Control for SOMMER 4020 4026 TX03-868-4 TX03-868-2 868 MHz Rolling Code 4 Buttons Hand Held Transmitter

Note: If the LED on your old remote control is green or yellow, it is not compatible. Access to the receiver required. Please make sure you have access to your receiver/gate opener before purchasing.

The handheld transmitter impresses on the one hand with its compact and handy design and on the other hand with its easy commissioning and operation.

With four channels, you can learn and control up to four different Sommer drives. This is a robust and high-quality replacement that includes a protective sliding key cover.

This remote control pairs with your Sommer receiver, just like the old one.

: for SOMMER 4020 TX03-868-4. for SOMMER 4026 TX03-868-2. for APERTO 4021

for APERTO 4025

for SOMMER 4011

for SOMMER 4025

for SOMMER 4031

for SOMMER 4035

for SOMMER 4025 BLUE

for SOMMER 4026 TX03-868-2

for SOMMER 4020 TX03-868-4

4011V000

4020V000

4025V000

4026V000

4031V000

4035V002

IMPORTANT!!!

Not compatible with Sommer 868 MHz SOMloq2 (Pearl, Pearl Twin, Pearl handheld transmitters)

Not compatible with for SOMMER TX55 868

Warning: Before purchasing, please make sure your for SOMMER remote is 868 MHz frequency and the LED indicator is red.

Programming: The remote has the same function as your old remote. must be programmed with the old receiver according to your old manual when you receive it.

1. Locate the Learn/Code Set button on the motor. This is usually located under the lamp cover or on the back of the motor.

2. Press the Learn/Code Set button once, then release. A light should come on.

3. Press the desired transmitter button once and the light will turn off.

4. Press the remote control again, the indicator light on the motor will flash and then turn off, indicating that the remote control has been coded.

5. Test the remote control function.

Color: Black and Silver

Material: Plastic+Metal

Package Contents:

1 x Remote Control

Only the above package content, other products are not included.

Note: Light reflection and different displays may cause the color of the item in a little different from the real thing. The measurement allowed error is +/- 1-3 cm.