Geevorks 16.8V Cordless Drill Driver, with 2 x 1.3Ah Batteries, 55Nm, 23+1 Torque Settings, 2 Speeds, LED Lights, Drill Driver for DIY Home Use

General Description

This 16.8V electric screwdriver is a versatile tool with a maximum torque of 55Nm and a speed of 1500rpm, equipped with a brushless motor. It allows you to quickly tighten or loosen screws, offering sufficient power for most household or industrial applications. Featuring two speed control modes and a continuously variable trigger control, it allows you to achieve the desired speed. It is suitable for tightening screws in all household situations, such as installing lighting, installing appliances, removing locks, etc.

Technical Specifications

• Name: Electric Screwdriver.
• Brand: Geeworks.
• Material: Plastic.
• Power Supply: Battery.
  
  • 2 batteries: 2 x 16.8V, 1300mAh batteries each (included in the 2-battery configuration).
• Maximum Torque: 55Nm.
• Speed: 1500rpm.
• Product Dimensions: 186 × 115 × 57 mm / 7.32 × 4.53 × 2.24 inches.
• Carton Dimensions: 216 × 167 × 90 mm / 8.50 × 6.57 × 3.54 inches.
• Product Weight:
  
  • With 2 batteries: 1043 g / 2.30 lbs.
• Carton box weight:
  
  • With 2 batteries: 1130 g / 2.49 lbs.
• Package contents (with 2 batteries): 1 × electric screwdriver, 2 × batteries, 1 × battery adapter.

Key Benefits

It also features 3 power indicators to remind you to recharge in a timely manner.

• Cooling System: Designed with multiple ventilation openings for efficient heat dissipation, it does not overheat even during prolonged use.

Usage

1. Installing the Bit: Select the appropriate screwdriver bit and insert it into the chuck on the main machine.Ensure it is securely locked in place.
2. Installing the Battery: Insert the battery (or batteries) into the battery compartment on the main machine, following the instructions.
3. Adjusting Torque and Speed: Use the torque regulator to adjust the torque setting to the desired level for the task.Select the speed mode (speed 1 or speed 2) using the speed switch.
4. Direction adjustment: Use the direction switch to select between clockwise (tightening screws) and counterclockwise (loosening screws).
5. Operation: Hold the machine firmly by the non-slip grip, position the bit on the screw, and then gently press the trigger to begin work.Adjust the pressure according to the task.
6. End of use: Release the trigger, place the direction switch in the locked position, then disconnect the battery (if necessary) and store the tool.

Operating Instructions

• Charging the Battery: Recharge the battery when it is low, using the supplied battery adapter. Do not use the tool when the battery is discharged to avoid reducing its lifespan.
• Selecting the Bit: Use the appropriate screwdriver bit for the screw head.
• Torque Setting: Start with a low torque setting and gradually increase it as needed to avoid stripping the screws.
• Safety: Wear protective gloves and safety glasses when using the tool. Avoid touching the rotating bit. Hold the tool firmly to maintain control.