GOOFIT Universal Fuel Filter Set (8-piece) – Suitable for motocross, quads and scooters – Washable metal filter element and fuel line modification kit

Key Product Benefits

Value Pack: Each pack contains 8 universal fuel filters with identical specifications, thus meeting the maintenance requirements of fleets, workshops looking to replenish their stock, or families with multiple vehicles. The cost per use is extremely low, making it an economical choice for frequent replacements or as a long-term backup solution. Transparent and visual design: Thanks to the highly transparent, fuel-resistant polycarbonate/acrylic housing, fuel flow and filter fouling level are directly visible, facilitating maintenance and preventing fuel interruptions. Durable and washable filter elements: The internal core consists of a stainless steel mesh filter element that can be repeatedly removed and cleaned (usually removable). It is durable, and its long-term cost is significantly lower than that of disposable paper filters. Wide compatibility: Designed to fit most off-road motorcycles, ATVs, scooters, go-karts, and small agricultural machinery with carburetors or electronic fuel injection systems and standard 6 or 8 mm inner diameter fuel lines. Important installation and compatibility notes: Check the connection and fuel line specifications (first Step):

This product uses a standard universal interface. Please ensure that the inner diameter of your fuel line (usually 6 or 8 mm) matches and that the product's connector is compatible. Use appropriate stainless steel hose clamps or special fuel line hose clamps to ensure a secure connection and prevent loosening or leakage due to vibration. Correct installation direction and position: The filter body is marked with arrows indicating the fuel flow direction. The end marked 'IN' (fuel inlet) must point towards the fuel tank, and the end marked 'OUT' (fuel outlet) towards the carburetor or fuel pump. Do not install upside down.

The installation location should be chosen on a straight section of the fuel line, away from high-temperature engine components and the exhaust system. At the same time, easy monitoring and maintenance should be ensured.

Installation and Safety Check:

Safety Precautions: Before installation, close the fuel valve (if present) and work in a well-ventilated area away from open flames.

Leak Test: After installation, open the fuel valve and carefully check each connection between the filter and fuel line for leaks. Do not start the engine until you have confirmed that there are no leaks.