Hayward SPX3020E Pump Seal Mounting Plate Compatible with Super II Series 2-1/2 Inch Sand Filter Pumps Sealing Plate for Sand Cylinder Connection

🔧 Precise Original Specifications: Specifically designed for Hayward SPX3020E models and Super II series sand filter pumps with 2-1/2" connections, the dimensions, bore positions, and threads are perfectly matched for optimal installation. 🛡️ Essential Sealing Component: As a crucial connecting element between the sand filter pump and check valve, the flatness and integrity of this component directly determine the system's tightness and is therefore fundamental to maintaining it. ⚙️ Reinforced and Durable Construction: Made from high-strength, dimensionally stable engineering plastics or composites, this component withstands system operating pressure and pipework stresses, and will not deform or crack even after prolonged use. 🔩 Easy Replacement and Repair: If the original plate no longer provides a proper seal due to aging, deformation, cracks, or scratches on the sealing surface, this part can be used directly as a replacement. This eliminates the need to replace the pump head or the check valve. Valves, resulting in significant cost savings. 💧 Integrated sealing surface: Provides a robust and flat mounting surface for large O-rings or gaskets, ensuring consistent compression and a high-pressure water seal between the pump body and valves. 📏 Standard interface: The center bore has a diameter of 63.5 mm (2-1/2 inches) and is precisely aligned with the Super II pump outlet to guarantee unobstructed water flow.