Heat-Powered Wood Stove Fan, 4 Blade Stove Fan, Fireplace Fan, Pellet Stove Fan, Wood Fireplace and Wood Stove

Energy Saving: The 4-blade heat fan can convert more heat while improving stability. The energy conversion efficiency is very high, saving more energy. Self-Powered: The wood stove fan is designed to circulate the hot air created by a wood/coal or pellet stove operating at normal surface temperatures between 80°C and 300°C. Overheat Protection: When the temperature exceeds 350 degrees Celsius, this chimney fan will gradually insulate the contact surface with the chimney and the fan will stop working to protect the machine's normal operation. Easy Operation: There is a hook on the stove fan for easy transport. No installation is required; simply follow the instructions to place your stove fan to the side of the wood stove or fireplace, not directly in front of or near it. 【Automatic Start】2018 upgraded technology, faster speed, larger air volume. Thermodynamic stove fans are designed to circulate the hot air produced by wood/coal or pellet stoves with a normal surface temperature of 80°C to 400°C. [Environmentally friendly and self-powered] The thermoelectric module acts as a small generator to drive the fan motor. No batteries or electricity are needed! Improved hot air circulation for greater comfort and 28% less firewood. [Safety Design] The oven stand is made of anodized aluminum, which withstands high temperatures up to 752°F (400°C) and will not warp or discolor even after prolonged use at high temperatures. [Longer Lifespan] The fan base is equipped with a bimetallic safety device. If the surface temperature exceeds 300°C, the safety device will gently lift the front of the fan to protect the thermoelectric generator (TEG) and motor. a. Product Performance Indicator 1. Fan Operating Principle: The thermal fireplace fan uses thermoelectric technology to convert temperature differences into electrical energy. A unique thermoelectric module is located in the center of the fan. When heated, the module creates hot and cold surfaces, and the heat flows through the conductive sheet, generating electricity to power the fan. 2. Product structure: metal handle, heat sink, bimetallic thermal conduction sheet, aluminum alloy fan blade. Product size: length 15 cm, width 9 cm, height 18 cm.