Heat Powered Wood Stove Fan with 6 Blades, Fireplace Fan, Stove Fan for Fireplace, Pellet Stove, Wood Fireplace and Wood Stove, 87 °C Quiet Start Operation

Energy Saving: The 6-blade heat fan can convert more heat while improving stability. The energy conversion efficiency is very high and saves more energy.

Self-Powered: The wood stove fan is designed to circulate the hot air generated by a wood stove/coal or pellet stove operating at normal surface temperatures between 60 °C and 350 °C.

Overheat Protection: When the temperature is above 350 degrees Celsius, this fireplace fan will gradually isolate the contact surface of the chimney and the fan will stop working to protect the normal operation of the machine.

Quiet Without Noise: Newly designed blade, larger air volume, with noise less than 35 dB. The only moving part is the blade unit. Say goodbye to horrible noise and enjoy warm air in a quiet and comfortable environment.

Easy to Use: There is a hook on the stove fan for easy carrying. No installation is required, just follow the instructions to place your stove fan on the side of the wood stove or fireplace, not directly in front of it or near it.

This is a fan that uses thermal energy as a power source to circulate the hot air from the wood fireplace. There is a thermoelectric module on the fan that acts as a small generator to drive the fan motor. Electric current is generated when this generator module experiences a heat difference between the top and bottom. The bottom of the fan heats the bottom of the module while the top of the module is kept cool by the top fan blades.

No batteries or electricity required!

That is to say, as long as it is on the wood stove, it absorbs heat to power the fan, which blows the hot air above the wood stove directly into the living space, increasing air circulation in the room and improving the heating efficiency of the stove

The speed of the fan varies depending on the temperature of the wood stove. The higher the stove temperature, the faster the rotation speed. When the stove temperature is so low that the fire goes out, the rotation speed slows down until the rotation stops.

Product advantages:

1 . Save fuel, fans disperse the heat of the stove, providing better energy efficiency.

2. Self-generator - no plug - no battery;

3. Quiet operation;

4. Automatic start, speed adjustment and stop;

5. Simple and elegant design.

How to use:

1. Place the stove fan on a smooth, flat surface on the stove, near the side or back of the chimney.

2. The stove fan is designed for freestanding stoves and the stove surface temperature is between 65℃ and 350℃. Temperatures above this range can damage fans and generators and render your fans ineffective.

Product Parameters:

Product: Fireplace Fan

Material: Aluminum Oxide

Air Volume: 180-210

Blades: 6 sheets

Wind Speed: 800-1100 rpm

Noise: ≦35 dB

Working Temperature: 60-350 °C

Battery: none

Size: 180 x 100 x 190 mm

Color: Black