Heat Powered Wood Stove Fan, 4 Blade Stove Fan, Fireplace Fan, Pellet Stove Fan, Wood Fireplace and Wood Stove

Energy Saving: The 4-blade heat fan can convert more heat while improving stability. The energy conversion efficiency is very high, saving more energy.

Self-powered: The wood stove fan is designed to circulate the hot air created by a wood stove / coal or pellet burning operating at normal surface temperatures between 80°C and 300°C.

Overheat Protection: When the temperature is above 350 degrees Celsius, this fireplace fan will gradually insulate the chimney contact surface and the fan will stop working to protect the normal operation of the machine.

Easy Operation: There is a hook on the stove fan for easy carrying. No installation required, just follow the instructions to place your stove fan to the side of the wood stove or fireplace, not directly in front or near it.

【Auto Start】Upgradable Technology 2018 level, faster speed, larger air volume. Thermodynamic stove fans are designed to circulate the hot air produced by wood/coal or pellet stoves with a normal surface temperature of 80°C to 400°C.

【Eco-friendly Environmental and Self-Powered】The thermoelectric module acts as a small generator to drive the fan motor. No batteries or electricity needed! Improved hot air circulation for more comfort and 28% less firewood.

【Safety Design】 The oven support is treated with anodized aluminum, which resists to high temperatures up to 752°F (400°C), and will not deform or fade even if it works for a long time in high temperature.

【Longer lifespan】 The fan base is equipped with a bi-metal safety device, if the surface temperature exceeds 300°C, the safety device will gently lift the front of the fan to protect the TEG and motor.

a . Product performance indicator

1. Fan working principle: The thermal fireplace fan uses thermoelectric technology to convert the temperature difference into electrical energy. There is a single thermoelectric module in the center of the fan. When heated, the module generates cold and hot surfaces, and the heat the conductive sheet flows into the module and generates electricity to operate the fan.

2. Product structure: metal handle, heat sink, bimetallic heat conduction sheet, aluminum alloy fan blade

Product size: length 15cm width: 9cm height: 18cm</ p>