High-performance outdoor Wi-Fi repeater with long-range Wi-Fi antenna – Wavlink AX3000 Mesh WiFi 6 amplifier – PoE outdoor Wi-Fi repeater – Ideal for large, remote areas--DTEKGAZ

【⭐Designed for Harsh Outdoor Conditions】Equipped with an IP67 waterproof housing, 15kV ESD protection, and 6kV surge protection, this access point functions flawlessly even in rain, snow, wind, thunderstorms, and other adverse weather conditions. The high-performance fiber optic antennas are not only wind and corrosion resistant but also improve Wi-Fi coverage. 【⭐Ultra-Fast Wi-Fi 6 Access Point】This access point is compatible with IEEE 802.11ac/a/b/g/n/ax standards and offers impressive dual-band speeds: up to 2402 Mbps in the 5 GHz band and 573 Mbps in the 2.4 GHz band. Ideal for HD streaming and smooth gaming, it utilizes a transmit power of <20 dBm (2.4 GHz, EIRP) and <28 dBm (5 GHz, EIRP) for stable connections. Note: Does not support DFS frequencies. 【⭐Optional PoE Power Supply】The Wavlink AX3000 supports both active and passive PoE according to 802.3AF/AT. Data transmission and power are delivered over a single Ethernet cable, allowing you to install the product outdoors even without a power outlet. Note: The PoE converter is not waterproof. Please use a CAT5E or higher-grade cable with a maximum length of 100 m. 【⭐Smooth Wi-Fi Roaming】Four omnidirectional 8 dBi antennas and two built-in high-power amplifiers ensure excellent Wi-Fi coverage and range. The outdoor PoE Wi-Fi repeater also supports mesh technology. With one click, you can connect additional devices, significantly extend your Wi-Fi coverage, and eliminate dead spots. 【⭐Multiple Operating Modes for Flexible Use】This Wi-Fi extender supports various operating modes such as mesh, access point (AP), router, repeater, and AP+repeater to meet different needs and be suitable for various outdoor application scenarios. Router/AP mode is ideal for converting wired connections into wireless networks. In mesh mode, you enjoy seamless Wi-Fi with a single network name and password. To install the antennas and Ethernet cable, follow these steps: Feed the RJ45 cable through the waterproof connector cover. Screw the gasket into the waterproof connector bracket. Feed the RJ45 cable through the waterproof connector bracket and screw it into the cover. Place the sealing ring onto the waterproof connector bracket. Connect the RJ45 cable to the WAN/LAN port. Screw the connecting cable into the 2.4 GHz and 5 GHz antenna connectors and tighten the plug.