High Power 433MHz Wireless Remote Control Switch, AC 220V/240V/110V 30A RF for Lights, Water Pumps, Home Appliances, Agricultural Irrigation

【Unique Design】433MHz RF wireless remote control switch. Stable and reliable performance, reception sensitivity (>- 105 dBm). The strong signal can pass through walls, floors and doors. It can pass through walls, floors and doors, controlling the receiver from anywhere within a reliable distance. The maximum range can reach 50 meters without obstacles.

【Easy to Use】: Extremely easy to set up and reset. There are 3 operating modes available (momentary/toggle/lock mode). You can easily set it according to your needs. The product's operating mode is adjustable. This item has already been configured in lock mode. And the "ON" button is for power on and the "OFF" button is for power on.

【High Sensitivity】 The receiver uses a 30A relay, which can load high-power electrical appliances to ensure long-term stability control. Each receiver can store approximately 20 transmitters. A single transmitter can also control multiple receivers (the transmitter must match the receiver).

【Quality Assurance】 High-quality relays can be used more than 100,000 times, making this product more stable and reliable. The high-power terminals can withstand a current of 30 A, so this product can perform well even when the current is unstable. The receiver is suitable for a voltage of 85 V ~ 240 V, making it more flexible to use.

【Wide Application】 The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely operate any device connected to the relay receiver via the remote control. Such as lights, pumps, wireless security alarms, fans, lamps, ventilation devices, monitors, printers, fountains and other electrical equipment, etc.

【Secure System】 The chip code is the EV1527 learning code, which is the most widespread technology that makes the remote control system more stable.

【Strong Signal Reception】 The receiver is equipped with an antenna, so you can extend it for stronger signal reception. The remote control distance can be up to 50 meters.

【Greater Flexibility】 Extremely easy to set up and reset. You can easily add more wireless switches according to your needs.

Product Parameters

AC 85V ~ 265V 30 Amp

Voltage: AC 85V ~ 265V

Maximum Current: 30A

RF Frequency: 433MHz

Supported Encoding: 1527 Learning Code

Receiving Sensitivity: > 97 dBm

RF working mode: ASK superheterodyne wireless reception

Operating temperature: -30 ~ +80

Receiving range: Open space more than 50 meters

Quiescent current: <5 MA

Locked mode

Press the 'ON' button, the relay will turn on; Press the "OFF" button and the relay will turn off.

Installation

Press the learning button (on the receiver) 3 times. Wait 3 seconds;

Press the "ON" button on the remote control. Wait 3 seconds.

Press the "OFF" button on the remote control. Operation successful.