High power wireless remote control switch 433 MHz, AC 220 V/240 V/110 V, 30 A, RF, for lighting, water pumps, household appliances and agricultural irrigation.

Description【Unique Design】433 MHz RF wireless remote control switch. Stable and reliable performance, high sensitivity and reception (>-105 dBm). A strong signal penetrates walls, floors, and doors. Control the receiver from anywhere within a reliable range. The maximum range reaches 50 meters without obstacles.【Easy to Use】: Extremely simple installation and reset. Three operating modes are available (momentary, toggle, and latched). Easily configure it according to your needs. The product's operating mode is adjustable. This device is already configured in latched mode. Use the ON button to turn it on and the OFF button to turn it off.【High Sensitivity】The receiver uses a 30A relay, capable of handling high-power electrical devices to ensure stable and long-lasting control. Each receiver can memorize approximately 20 transmitters. One transmitter can also control multiple receivers (the transmitter must be paired with the receiver). 【Quality Guarantee】High-quality relays designed for over 100,000 operating cycles. This ensures greater stability and reliability. The high-power terminals support a current of 30A, guaranteeing optimal operation even with unstable current. The receiver is compatible with voltages from 85V to 240V, making it more versatile. [Wide Application] This product can be used in homes, farms, factories, offices, laboratories, supermarkets, and more. You can remotely control any device connected to the relay receiver, such as lights, pumps, security alarms, wireless devices, fans, lamps, ventilation systems, monitors, printers, fountains, and other electrical equipment. [Secure System] The chip uses EV1527 learning code, a widely used technology that ensures greater stability for the remote control system. [Powerful Signal Reception] The receiver is equipped with an antenna to extend its range for optimal signal reception. The remote control range can reach up to 50 meters. [More Flexibility] Extremely simple installation and reset. You can easily add additional wireless switches as needed. Product Parameters AC 85V ~ 265V 30A Voltage: AC 85V ~ 265V Maximum Current: 30A RF Frequency: 433MHz Supported Encoding: 1527 Learning Code Reception Sensitivity: > 97dBm RF Operating Mode: Superheterodyne ASK Wireless Reception Operating Temperature: -30°C ~ +80°C Reception Range: Open space of more than 50 meters Standby Current: < 5mA Locked Mode Press the ON button, the relay will turn on; Press the OFF button; the relay will turn off. Installation: Press the learning button (on the receiver) 3 times. Wait 3 seconds. Press the ON button on the remote control. Wait 3 seconds. Press the OFF button on the remote control. Operation successful.