Outdoor solar fountain pump, 1.5W solar pump kit, suitable for ponds and fountains, with ground socket.

Solar Panel: 5V / 1.5W Pump Output: DC 4.5-10V Maximum Flow Rate: 150 liters/hour Maximum Spray Height: 45 cm Accessories: Solar panel, pump, other accessories Instructions for Use 1. Assemble the product as shown in the diagram. 2. Place the solar panel in a suitable location, ensuring it is not obstructed. The pump will start within 3 seconds after the solar panel receives sufficient sunlight. 3. When the pump is first immersed in water, the flow rate may be insufficient due to air in the impeller. It is recommended to connect the nozzle only after the pump is operating normally. 4. This product is a direct-drive solar water pump and does not include an external battery. The spray height depends entirely on the solar radiation intensity. In insufficient sunlight, the pump will not run continuously but will automatically restart several times until the solar radiation intensity reaches a certain level before resuming continuous operation. 5. The water pump must be completely submerged in water during use and should never be left dry for extended periods. 6. Keep the water source clean and clean the water pump regularly to prevent foreign objects from being sucked in and affecting its normal operation. Product Description: This product is a direct-drive solar water pump and requires no external battery. The water column height depends entirely on the intensity of solar radiation. In insufficient sunlight, the water pump will not run continuously but will automatically stop and restart until the solar radiation intensity reaches a certain level before resuming continuous operation. Important Note: When testing or installing a solar fountain, the water pump must be submerged in water. This prevents the motor from burning out due to lack of water. Therefore, if the pool or pond is empty, it must be filled with water as soon as possible.