High-quality stainless steel cleats for Worx Landroid lawnmower model S/M. Thickness 2mm, improved traction - polished deburring - wheel diameter: 205mm

Improve traction – with our Worx robotic mower spikes, there are no more holes in the lawn, it's easier to drive uphill, and it won't slip on wet days. 205 mm in diameter and 2 mm thick.

Stainless steel material – Our Worx robotic mower spikes are made of 304 stainless steel and polished in an additional production step for a perfect finish.

Premium Phillips Head Screws - The 4 x 20 mm stainless steel Phillips head screws ensure easy mounting of the mower tines, and the countersunk screw holes allow for a perfect screw fit, so the lawnmower wheels won't get caught by the screw heads.

Compatible with all S and M models (not for 2021 models): S300 [WR130E], M500 [WR141E], M700 [WR142E], M1000 [WR143E], S450i [WR101 SI], S4. 50i [WR102SI], S450i [WR106SI], S700i [WR101 SI], M800i [WR111MI], M800i [WG757E], M900 [WG758E], M1000i [WG796E.1], M50.0 2.0. [WR165E], M700 2.0 [WR167E]

Quality Service – Your satisfaction is our goal. We offer 100% after-sales service for our robotic lawnmowers.

Product Description

Tips for Worx S&M Models

High-quality stainless steel tips ensure much better traction for your robotic lawnmower.

On wet surfaces, steep terrain, or difficult ground, the robotic mower can get stuck and dig unsightly holes in the lawn.

With our tips, that's a thing of the past.

High-Quality Stainless Steel Material and Phillips Head Screws

Our Worx robotic lawnmower tips are made of stainless steel and polished in an additional production step for a perfect finish. All edges of the Worx traction improver are deburred.

4 x 20 stainless steel Phillips head screws ensure easy assembly of the robotic lawnmower spikes, and the countersunk screw holes allow the screws to sit perfectly flush so the robotic lawnmower wheels are not pinched by the screw heads.

ASSEMBLY INSTRUCTIONS

Mounted on the outside of the tire

Tools required:

Cross drill bit

1.5 mm drill bit (optional)

Fitting Tips

Place your Worx Landorid vertically so that the left or right tire is facing upwards. Place the spikes on the wheel and center them. You can now pre-drill holes with a 1.5 mm drill bit. Then use the supplied stainless steel screws to secure the spikes to the tire.