Improve traction - with our spikes for Worx robotic lawn mowers, there will be no more holes in the lawn, driving in the mountains will be easier and it will not slip on rainy days. 205 mm diameter and 2 mm thickness.
Stainless steel material - The spikes of our Worx robotic lawn mowers are made of 304 stainless steel and polished in an additional production step to achieve a perfect look. All edges of the Worx Traction Booster are deburred.
Premium Phillips Screws - The 4 x 20mm stainless steel Phillips screws ensure easy installation of the trimmer tips and the countersunk screw holes allow the screws to fit snugly so mower wheels won't get pinched by the screw heads.
Compatible with all S and M models (not for 2021 models) S300 [WR130E], M500 [WR141E], M700 [WR142E], M1000 [WR143E], S450i [WR101 SI], S4. 50i [WR102SI], S450i [WR106SI], S700i [WR101 SI], M800i [WR111MI], M800i [WG757E], M900 [WG758E], M1000i [WG796E.1], M50. 0 2.0. [WR165E], M700 2.0 [WR167E]
Quality service - your satisfaction is our goal. We offer 100% customer service for our robot nail clippers.
Product description
Tips for Worx S&M models
The high-quality stainless steel spikes ensure significantly better traction for your robotic lawnmower.
On wet surfaces, steep terrain or difficult terrain, the robotic lawnmower can get stuck and dig unsightly holes in the lawn.
With our spikes, that is a thing of the past.
Stainless steel material and high-quality Phillips screws
Our lawnmower tips from Worx Robotics are made of stainless steel and polished in an additional production step to give them a perfect appearance. All edges of the Worx traction booster are deburred.
4 x 20 stainless steel Phillips screws can ensure easy installation of the robotic lawnmower spikes, and the countersunk screw holes allow the screws to fit perfectly so that the wheels of the robotic lawnmower are perfectly seated and not pinched by the screw heads.
INSTALLATION INSTRUCTIONS
Installation on the outside of the tire
Tools required:
< p>Cross drill
1.5mm drill bit (optional)
Installation tips
Place your Worx Landorid vertically so that the left or right tire is facing up. Place the nails on the wheel and center them. It is now possible to pre-drill holes with a 1.5mm drill bit. Then attach the spikes to the tire with the included stainless steel screws.
'/%3E%3C/svg%3E){kind=small}